[aprssig] FTM-100DR APRS path for ISS?

Lynn W. Deffenbaugh (Mr) ldeffenb at homeside.to
Thu Jun 1 10:57:45 CDT 2017


OUCH!

I sure hope this isn't the case with all of the other Yaesu APRS 
radios!  Never even thought to question the configurability of the 
outbound packet path.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 6/1/2017 11:37 AM, Bob Burns W9BU wrote:
> Appears to be true.
>
> See page 41 of the FTM-100DR APRS manual. Your choices for digipeater 
> route are "OFF", "WIDE1-1", or "WIDE1-1,WIDE2-1". Other than those 
> three selections, the route is not configurable.
>
> Bob...
>
>
> On 5/25/2017 10:02 AM, Robert Bruninga wrote:
>>
>> Is it true that the FTM-100DR does not allow any other path than 
>> WIDE1-1 and/or WIDE2-1?
>>
>> Bob, WB4APR
>>
>> ---------- Forwarded message ----------
>> Subject: APRS Routing
>>
>> I have a Yaesu FTM-100DR with GPS and built-in TNC (etc.). The APRS 
>> setup allows only Wide-1 and Wide-2 (and "Off") routing, with no 
>> alteration available.   I guess it's called the New Paradigm. The 
>> manual even says (settings cannot be changed)..
>>
>>
>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at tapr.org
>> http://www.tapr.org/mailman/listinfo/aprssig
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig




More information about the aprssig mailing list