[aprssig] FTM-100DR APRS path for ISS?

Andrew Rich vk4tec at internode.on.net
Thu Jun 1 10:56:36 CDT 2017


Great for land based aprs 

Sent from my iPhone

> On 2 Jun 2017, at 1:37 am, Bob Burns W9BU <w9bu_lists at rlburns.net> wrote:
> 
> Appears to be true.
> 
> See page 41 of the FTM-100DR APRS manual. Your choices for digipeater route are "OFF", "WIDE1-1", or "WIDE1-1,WIDE2-1". Other than those three selections, the route is not configurable.
> 
> Bob...
> 
> 
>> On 5/25/2017 10:02 AM, Robert Bruninga wrote:
>> 
>> Is it true that the FTM-100DR does not allow any other path than WIDE1-1 and/or WIDE2-1?
>> 
>> Bob, WB4APR
>> 
>> ---------- Forwarded message ----------
>> Subject: APRS Routing
>> 
>> I have a Yaesu FTM-100DR with GPS and built-in TNC (etc.). The APRS setup allows only Wide-1 and Wide-2 (and "Off") routing, with no alteration available.   I guess it's called the New Paradigm. The manual even says (settings cannot be changed)..
>> 
>> 
>> 
>> _______________________________________________
>> aprssig mailing list
>> aprssig at tapr.org
>> http://www.tapr.org/mailman/listinfo/aprssig
> 
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig



More information about the aprssig mailing list