[aprssig] FTM-100DR APRS path for ISS?
rlove31 at gmail.com
Thu Jun 1 11:09:17 CDT 2017
It is a darn good way to enforce 'reasonable' paths to protect from
flooding the freq.
You can't have abusive paths if they can't even be entered into the radio.
On Thu, Jun 1, 2017 at 11:56 AM, Andrew Rich <vk4tec at internode.on.net>
> Great for land based aprs
> Sent from my iPhone
> > On 2 Jun 2017, at 1:37 am, Bob Burns W9BU <w9bu_lists at rlburns.net>
> > Appears to be true.
> > See page 41 of the FTM-100DR APRS manual. Your choices for digipeater
> route are "OFF", "WIDE1-1", or "WIDE1-1,WIDE2-1". Other than those three
> selections, the route is not configurable.
> > Bob...
> >> On 5/25/2017 10:02 AM, Robert Bruninga wrote:
> >> Is it true that the FTM-100DR does not allow any other path than
> WIDE1-1 and/or WIDE2-1?
> >> Bob, WB4APR
> >> ---------- Forwarded message ----------
> >> Subject: APRS Routing
> >> I have a Yaesu FTM-100DR with GPS and built-in TNC (etc.). The APRS
> setup allows only Wide-1 and Wide-2 (and "Off") routing, with no alteration
> available. I guess it's called the New Paradigm. The manual even says
> (settings cannot be changed)..
> >> _______________________________________________
> >> aprssig mailing list
> >> aprssig at tapr.org
> >> http://www.tapr.org/mailman/listinfo/aprssig
> > _______________________________________________
> > aprssig mailing list
> > aprssig at tapr.org
> > http://www.tapr.org/mailman/listinfo/aprssig
> aprssig mailing list
> aprssig at tapr.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the aprssig