km6gvw at jesshaas.com
Sat Jun 17 19:39:52 CDT 2017
As we move to more software based decoding and more advanced TNCs would it
be feasible to support multiple baud rates on one frequency? I know things
like direwolf already do some things with mltiple decoders, although im not
really sure it works in this way yet.
The robust nature of 1200baud is great for some things but not always
ideal. For instance if a digipeater in my area supported 9600 or even
something faster and i knew i was in range i could beacon at a faster speed
reducing the chance of collision and using up less time. For backwards
compatibility the digipeater could digipeat at 1200baud.
Or if I was just trying to get to an igate i could use a direct path at a
faster speed. This could allow for longer length messages without using up
In areas with higher speed support I could see something like proportional
pathing but with different baud rates being used.
300 baud could even be used to increase range.
K5LLI (was briefly KM6GVW until I got my old call back)
On Jun 17, 2017 3:58 PM, "Andrew Rich" <vk4tec at internode.on.net> wrote:
I have been playing with 19k2 433 modules
180 characters payload uart
Worth pursuing ?
Sent from my iPhone
> On 18 Jun 2017, at 1:12 am, Andrew Rich <vk4tec at internode.on.net> wrote:
> In Australia it's pretty quiet
> Do you get aprs dog piles in the USA ?
> Sent from my iPhone
>> On 18 Jun 2017, at 12:02 am, Steve Dimse <steve at dimse.com> wrote:
>>> On Jun 17, 2017, at 1:54 AM, Andrew Rich <vk4tec at internode.on.net>
>>> Do u think aprs will evolve past 1200 ?
>> APRS is a protocol that will run at any bitrate. Even at the beginning
there was a 56k rf modem that was used, some areas today have 9600 baud
nets built with off-the-shelf radios like the D-710, and of course many
people run via LTE cellphones which are many Mb/sec.
>> Will there ever be a high speed network on ham frequencies that can
match the ubiquity of 144.39? No. But if you want faster in your area, you
can do it now.
>> Steve K4HG
>> aprssig mailing list
>> aprssig at tapr.org
> aprssig mailing list
> aprssig at tapr.org
aprssig mailing list
aprssig at tapr.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the aprssig