[aprssig] SSn-n model for coastal wx alerts

Dan Srebnick k2dls at k2dls.net
Fri Nov 10 16:58:28 CST 2017


It is working now with the commas...spoke to soon.  Not sure why it
didn't work on the first few attempts but verified working now..
Thanks for the response...
73

On Fri, 2017-11-10 at 17:22 -0500, Dan Srebnick wrote:
> Thread seems to have fallen off the list, looping the list back in...
> It didn't work with commas, that was the first method I attempted.
> On Fri, 2017-11-10 at 13:17 -0800, Kenneth Finnegan wrote:
> > I'm actually out at a conference all weekend without a laptop, so I
> > can't say off the top of my head, but I'd expect aprx to support a
> > multihop path just by listing them with commas? Maybe someone else
> > in front of a computer will chime in before I get back. 
> > 
> > Kenneth Finnegan
> > On Nov 10, 2017 10:59, "Dan Srebnick" <k2dls at k2dls.net> wrote:
> > > Kevin, does aprx support multiple via paths on a single
> > > beacon?  I tried a few syntactical variants and it doesn't not
> > > seem to work:
> > > 
> > > beacon via DIGI1,DIGI2
> > > beacon via DIGI1 via DIGI2
> > > 
> > > The question does not seem to be addressed anywhere in the
> > > documentation.
> > > 
> > > 73,
> > > 
> > > Dan
> > > 
> > > On Fri, 2017-11-10 at 08:07 -0800, Kenneth Finnegan wrote:
> > > > If you're only interested in a specific two digis, you could
> > > > instead generate two packets with specific paths of "DIGIA" and
> > > > "DIGIB" or one packet with "DIGIA,DIGIB" to elliminate the need
> > > > to get buy-in and continued support from other operators. 
> > > > 
> > > > Depends if they happen to have digipeating on their own call
> > > > turned on. 
> > > > 
> > > > Kenneth Finnegan
> > > > 
> > > > On Nov 10, 2017 07:34, "Dan Srebnick" <k2dls at k2dls.net> wrote:
> > > > > I live near the NJ shore and send wx alerts via RF that
> > > > > relate to
> > > > > 
> > > > > coastal waters.  There is no need to propagate these alerts
> > > > > inland.
> > > > > 
> > > > > There are a couple of high profile digis along the coast and
> > > > > I was
> > > > > 
> > > > > thinking about using the SSn-N model to create a via path
> > > > > that would
> > > > > 
> > > > > ONLY get digi'd along the coast by participating stations.
> > > > > 
> > > > > 
> > > > > 
> > > > > I was thinking of something along the lines of MMn-N and then
> > > > > asking
> > > > > 
> > > > > the operators of the two digis of interest if they would set
> > > > > that up
> > > > > 
> > > > > using the UIFLOOD definition usually used for SSn-N.
> > > > > 
> > > > > 
> > > > > 
> > > > > Any thoughts or suggestions?
> > > > > 
> > > > > 
> > > > > 
> > > > > _______________________________________________
> > > > > 
> > > > > aprssig mailing list
> > > > > 
> > > > > aprssig at tapr.org
> > > > > 
> > > > > http://www.tapr.org/mailman/listinfo/aprssig
> > > > > 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20171110/88d7f9e5/attachment.html>


More information about the aprssig mailing list