[aprssig] Another APRS satellite (9600 baud)

Fred Hillhouse fmhillhouse at comcast.net
Tue Oct 3 11:00:25 CDT 2017


Hi Lynn,

 

If an I-Gate was running APRSIS32, would it pass all the FalconSat data or just the APRS packets?

 

Best regards,

Fred N7FMH

 

From: aprssig [mailto:aprssig-bounces at tapr.org] On Behalf Of Lynn W. Deffenbaugh (Mr)
Sent: Monday, October 02, 2017 12:30 PM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] Another APRS satellite (9600 baud)

 

Would that be the Falconsat-3 ID 30776?  Or a different Falconsat?

Lynn (D) - KJ4ERJ - Operator of SATSRV

On 10/2/2017 11:01 AM, Robert Bruninga wrote:

Looks like Falconsat passes (4) are coming over Northern mid latitudes from about 10 AM to around 1600 local Daylight time.

 

Just listened today, and it has a solid continuous 9600 baud downlink from horizon to horizon.  If you are running WISP then your file system will fill with the data files.

 

But just running my TM-D710G in APRS mode, it received dozens of UI packets.  I could see the callsigns, but since they were not APRS protocol, they just blinked with the ?? for unknown.  But my APRS packet was digipeated a few times.  If there had been other APRS users on the uplink, then I would have seen them.

 

BUT PLEASE.  RECOGNIZE that APRS UI packets are NOT what this satellite was designed for.  So test your system, understand how it works, be ready if you need to send emergency packets or make some contacts, but PLEASE do not just beacon randomly.  It screws up the FILE SERVER protocol for those other users.

 

And NEVER beacon unattended.

 

And we need some IGATES to be monitoring and feeding the APRS-IS, BUT ONLY APRS PACKETS.  The APRS-IS feed cannot possibly handle full stream continuous 9600 baud downlink.

 

How are we going to do this?

Thanks

 

Bob, WB4aPR

 

 

From: Robert Bruninga [mailto:bruninga at usna.edu] 
Sent: Sunday, October 01, 2017 1:43 PM
To: TAPR APRS Mailing List
Cc: Robert Bruninga
Subject: Another APRS satellite (9600 baud)

 

The Airforce Academy turned over its Falconsat satelliite to Hams and I  had not realized it supports APRS digipeating.  But at 9600 baud and cross band.

 

This is a great bird to get some experience on operating 9600 baud.

https://www.amsat.org/falconsat-3/

 

435.103 MHz down and 145.840 up DIGI call of PFS3-1.  While of course setting 5 memories to chase the Doppler the full 20 KHz during the pass.

 

I guess we need some APRS IGates to collect packets on the downlink.  Of course this is not easy because the doppler shifts through 5 channels at 5 KHz steps due to DOppler.  But if we have enough passive receivers all over the USA  Then one of them will always be in the passband for at least some packets.

Just tune in 435.110 which is 7 KHz high and you will at least hear the start of the pass and if you are in the shack, you can then follow it down.

Bob, WB4APR






_______________________________________________
aprssig mailing list
aprssig at tapr.org
http://www.tapr.org/mailman/listinfo/aprssig

 



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20171003/96506855/attachment.html>


More information about the aprssig mailing list