[aprssig] APRS Speed Spec? (Above Mach 1)

Robert Bruninga bruninga at usna.edu
Thu Oct 12 08:16:26 CDT 2017


In a move to keep APRS relevant, there was some useful feedback on the idea
to extend the speed range of APRS reporting.  I like the transition at Mach
1 (670 kts).



So here is the way to handle speeds above Mach 1 and it works for both MicE
and CSE/SPD values of X speed field.



If X Less than or equal to 670 then SPEED = X in Kts

If X is greater than 670 then SPEED is 135X -90000  in Kts



You do not even need to do the math.  You can just use some pre-calculated
values shown here:



779 = 15,200 knots space station

682 =     2100 knots Mach 3

678 =     1600 knots military

677 =     1340 knots Mach 2

675 =     1200 knots Concorde

670 =       670 knots Mach 1



These remain in Knots because that is the APRS standard for speed, but of
course you can also display them in MPH if you want to make that conversion
which I think all PILOTS use.



Bob, WB4APR
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20171012/43b70e13/attachment.html>


More information about the aprssig mailing list