[bbssig] msys with a dual port kam

[Dave DeMott]

I checked around my area and no help. You might check out "Air Mail". It is
for todays packet. Good luck. 

 

 



 

-------Original Message-------

 

From: Quentin Falkenbury

Date: 1/17/2009 8:00:28 AM

To: bbssig

Subject: [bbssig] msys with a dual port kam

 

Hi

I am trying to get msys working with a dual port kam.I can 

get the kam into kiss mode and recieve on the vhf port and hf port bfut i
cannot get it to transmit on the vhf port.I know 

its just getting the msys.opt written properly but i am not sure how to
write the ports properly.Its on com 2 and the book says the kam vhf port is
port 1 and the hf is port 2.

 

Any help would be appreciated.

                   Quentin

The kam is a Kam all mode.

 

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tapr.org/pipermail/bbssig/attachments/20090117/de91c2fe/attachment.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1458 bytes
Desc: not available
Url : http://www.tapr.org/pipermail/bbssig/attachments/20090117/de91c2fe/attachment.jpeg 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 1267 bytes
Desc: not available
Url : http://www.tapr.org/pipermail/bbssig/attachments/20090117/de91c2fe/attachment.gif