Order Tray | Contact Us | Home | SIG Lists

[dsp] AFSK demodulator code for ARM7TDMI?

John B. Stephensen kd6ozh at verizon.net
Sun Feb 13 22:15:58 UTC 2005


I downloaded the Gnu tools but never used them for development as Nohau had
a deal on an emulator with bundled development software.

73,

John
KD6OZH

----- Original Message -----
From: "Robert McGwier" <rwmcgwier at comcast.net>
To: "TAPR DSP Mailing List" <dsp at lists.tapr.org>
Sent: Sunday, February 13, 2005 21:54 UTC
Subject: RE: [dsp] AFSK demodulator code for ARM7TDMI?


> Have you used the Gnu tools and Insight?
>
> Bob
> N4HY
>
> -----Original Message-----
> From: dsp-bounces at lists.tapr.org [mailto:dsp-bounces at lists.tapr.org]On
> Behalf Of John B. Stephensen
> Sent: Sunday, February 13, 2005 9:33 PM
> To: TAPR DSP Mailing List
> Subject: Re: [dsp] AFSK demodulator code for ARM7TDMI?
>
>
> I'm using the Nohau emulator and Hi-Tech C and assembler so I can't give
any
> advice on the IAR tools. I use the Oki Windows software for flash ROM
> programming.
>
> 73,
>
> John
> KD6OZH
>
> ----- Original Message -----
> From: <Chris_Anderson at grayhill.com>
> To: "TAPR DSP Mailing List" <dsp at lists.tapr.org>
> Sent: Sunday, February 13, 2005 20:43 UTC
> Subject: Re: [dsp] AFSK demodulator code for ARM7TDMI?
>
>
> >
> >
> >
> >
> >
> > John,
> >
> >       I concur, which is why all our new development is ARM7s as well. A
> > question for you, I'm messing with the ML67K CPU board that Oki sells,
> > using the IAR Embedded Workbench tools, and I haven't been able to get
the
> > tools to download/debug from internal flash. Have you had any luck with
> > that?
> >
> > Thanks
> >
> >
> >
> >
> >
> > "John B. Stephensen" <kd6ozh at verizon.net>@lists.tapr.org on 02/11/2005
> > 02:46:27 PM
> >
> > Please respond to TAPR DSP Mailing List <dsp at lists.tapr.org>
> >
> > Sent by:    dsp-bounces at lists.tapr.org
> >
> >
> > To:    "TAPR DSP Mailing List" <dsp at lists.tapr.org>
> > cc:
> >
> > Subject:    Re: [dsp] AFSK demodulator code for ARM7TDMI?
> >
> >
> > I've been using the Oki Semiconductor ARM7 MCU and it makes a nice
> platform
> > for amateur applications as there are development tools available at no
> > charge. There are also parts available from Philips, Cirrus Logic, and
> > others with ARM7 and ARM9 CPUs to 200 MHz and various peripherals. An
> > on-chip HS USB port is even available from Oki. This architecture is
going
> > to become as ubiquitous as the 8051.
> >
> >
> >
> > _______________________________________________
> > dsp mailing list
> > dsp at lists.tapr.org
> >  https://lists.tapr.org/cgi-bin/mailman/listinfo/dsp
> >
> >
> >
> > _______________________________________________
> > dsp mailing list
> > dsp at lists.tapr.org
> > https://lists.tapr.org/cgi-bin/mailman/listinfo/dsp
> >
>
>
>
> _______________________________________________
> dsp mailing list
> dsp at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/dsp
>
>
>
> _______________________________________________
> dsp mailing list
> dsp at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/dsp
>






More information about the dsp mailing list