[hfsig] hfsig Digest, Vol 31, Issue 2

todd nexstar1 at hughes.net
Mon Mar 27 18:17:30 CDT 2017


Thanks for the reply Bob, That’s what  I did. Was in  "cd WsprryPi " Doing a 
complete reload. Ended up that the green light flashed every one second and 
couldn't stop it even with a reboot.

When I typed    sudo ./wsp -r -o -s wd6dfh CN84ke 20 20m   it locked up the 
Pi 3B and had to recycle the power. Nothing worked, mouse or keyboard.

Thanks Richard.......That is the string that I used and it would lock up the 
Pi 3B and as above had to cycle the power.

Also when I install the board the green LED starts blinking........Thinking 
that I have a bad Pi 3b or the firmware is corrupted.

Did all the updates prior to trying the board.

Todd

--------------------------------------------------
From: <hfsig-request at tapr.org>
Sent: Monday, March 27, 2017 2:55 PM
To: <hfsig at tapr.org>
Subject: hfsig Digest, Vol 31, Issue 2

> Send hfsig mailing list submissions to
> hfsig at tapr.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://www.tapr.org/mailman/listinfo/hfsig
> or, via email, send a message with subject or body 'help' to
> hfsig-request at tapr.org
>
> You can reach the person managing the list at
> hfsig-owner at tapr.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of hfsig digest..."
>
>
> Today's Topics:
>
>   1. Problem with operation (todd)
>   2. Re: Problem with operation (Bob Cutter)
>   3. Re: Problem with operation (Dennis Hall)
>   4. Re: Problem with operation (Richard Waller)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 27 Mar 2017 09:45:49 -0800
> From: "todd" <nexstar1 at hughes.net>
> To: <hfsig at tapr.org>
> Subject: [hfsig] Problem with operation
> Message-ID: <59E7930EDE7F429C860CA16EC7B8B6FA at LivingroomPc>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Received my wspr board and installed it in a Raspberry Pi 3B board(no 
> problem here).
> Went through the latest install instructions in which everything seemed 
> ok.
> I then typed this in:
> wspr  -r -o -s wd6dfh CN84ke 20 20m    enter
>
> and I get this message   can't open /dev/mem
> Then it just stops. Did this not get installed when I set it up or does it 
> have to be set up after the install? Am a rank noob when it comes to 
> Linux.
>
> If I use the old way:
> sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m
>
> the screen locks up and the power to the Raspberry has to be removed to 
> re-boot.
>
> Any help would be much appreciated.
>
> Thanks
> Todd  WD6DFH
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> <http://www.tapr.org/pipermail/hfsig/attachments/20170327/27dbca06/attachment-0001.html>
>
> ------------------------------
>
> Message: 2
> Date: Mon, 27 Mar 2017 17:59:18 +0000 (UTC)
> From: Bob Cutter <ki0g at yahoo.com>
> To: TAPR HF Modes SIG Mailing List <hfsig at tapr.org>
> Subject: Re: [hfsig] Problem with operation
> Message-ID: <1795269654.4605517.1490637558675 at mail.yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px 
> #715FFA solid !important; padding-left:1ex !important; 
> background-color:white !important; } Try:
> cd wsprrypi
> Then
> sudo......
> Bob KI0G
>
>
> Sent from Yahoo Mail for iPhone
>
>
> On Monday, March 27, 2017, 12:48 PM, todd <nexstar1 at hughes.net> wrote:
>
> Received my wspr board and installed it in a Raspberry Pi 3B board(no 
> problem here).Went through the latest install instructions in which 
> everything seemed ok. I then typed this in:wspr  -r -o -s wd6dfh CN84ke 20 
> 20m    enter and I get this message   can't open /dev/memThen it just 
> stops. Did this not get installed when I set it up or does it have to be 
> set up after the install? Am a rank noob when it comes to Linux. If I use 
> the old way:sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m the screen locks up 
> and the power to the Raspberry has to be removed to re-boot. Any help 
> would be much appreciated. ThanksTodd 
> WD6DFH_______________________________________________
> hfsig mailing list
> hfsig at tapr.org
> http://www.tapr.org/mailman/listinfo/hfsig
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> <http://www.tapr.org/pipermail/hfsig/attachments/20170327/85991353/attachment-0001.html>
>
> ------------------------------
>
> Message: 3
> Date: Mon, 27 Mar 2017 11:18:53 -0700
> From: Dennis Hall <dennis at kk7x.us>
> To: TAPR HF Modes SIG Mailing List <hfsig at tapr.org>
> Subject: Re: [hfsig] Problem with operation
> Message-ID:
> <CALKJWmXucEB5ajpNi+3x84z5MAamN+Su_UUeGfHYNpFm=84dhA at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> CD WsprryPi
>
> On Mon, Mar 27, 2017 at 10:59 AM, Bob Cutter <ki0g at yahoo.com> wrote:
>
>> Try:
>>
>> cd wsprrypi
>>
>> Then
>>
>> sudo......
>>
>> Bob KI0G
>>
>>
>> Sent from Yahoo Mail for iPhone <https://yho.com/footer0>
>>
>> On Monday, March 27, 2017, 12:48 PM, todd <nexstar1 at hughes.net> wrote:
>>
>> *Received my wspr board and installed it in a Raspberry Pi 3B board(no
>> problem here).*
>> *Went through the latest install instructions in which everything seemed
>> ok. *
>> *I then typed this in:*
>> *wspr  -r -o -s wd6dfh CN84ke 20 20m    enter*
>>
>> *and I get this message   can't open /dev/mem*
>> *Then it just stops. Did this not get installed when I set it up or does
>> it have to be set up after the install? Am a rank noob when it comes to
>> Linux.*
>>
>> *If I use the old way:*
>> *sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m*
>>
>> *the screen locks up and the power to the Raspberry has to be removed to
>> re-boot.*
>>
>> *Any help would be much appreciated.*
>>
>> *Thanks*
>> *Todd  WD6DFH*
>> _______________________________________________
>> hfsig mailing list
>> hfsig at tapr.org
>> http://www.tapr.org/mailman/listinfo/hfsig
>>
>>
>> _______________________________________________
>> hfsig mailing list
>> hfsig at tapr.org
>> http://www.tapr.org/mailman/listinfo/hfsig
>>
>>
>
>
> -- 
> http://rathdrumweather.us
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> <http://www.tapr.org/pipermail/hfsig/attachments/20170327/13bb2b33/attachment-0001.html>
>
> ------------------------------
>
> Message: 4
> Date: Mon, 27 Mar 2017 18:54:59 -0400
> From: Richard Waller <rewaller at verizon.net>
> To: TAPR HF Modes SIG Mailing List <hfsig at tapr.org>
> Subject: Re: [hfsig] Problem with operation
> Message-ID: <16EF47CA-99F8-4033-92D6-3887556A39C4 at verizon.net>
> Content-Type: text/plain; charset="utf-8"
>
> Todd, I'm a noob too but you need to type sudo ./wspr then the rest of it 
> starting with -r. Also make sure you are in the WsprryPi directory
>
> Sent from my iPad
>
>> On Mar 27, 2017, at 1:45 PM, todd <nexstar1 at hughes.net> wrote:
>>
>> Received my wspr board and installed it in a Raspberry Pi 3B board(no 
>> problem here).
>> Went through the latest install instructions in which everything seemed 
>> ok.
>> I then typed this in:
>> wspr  -r -o -s wd6dfh CN84ke 20 20m    enter
>>
>> and I get this message   can't open /dev/mem
>> Then it just stops. Did this not get installed when I set it up or does 
>> it have to be set up after the install? Am a rank noob when it comes to 
>> Linux.
>>
>> If I use the old way:
>> sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m
>>
>> the screen locks up and the power to the Raspberry has to be removed to 
>> re-boot.
>>
>> Any help would be much appreciated.
>>
>> Thanks
>> Todd  WD6DFH
>> _______________________________________________
>> hfsig mailing list
>> hfsig at tapr.org
>> http://www.tapr.org/mailman/listinfo/hfsig
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> <http://www.tapr.org/pipermail/hfsig/attachments/20170327/a73c8117/attachment.html>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> hfsig mailing list
> hfsig at tapr.org
> http://www.tapr.org/mailman/listinfo/hfsig
>
>
> ------------------------------
>
> End of hfsig Digest, Vol 31, Issue 2
> ************************************
> 


More information about the hfsig mailing list