[hfsig] hfsig Digest, Vol 31, Issue 2

Richard Waller rewaller at verizon.net
Mon Mar 27 19:24:22 CDT 2017


Todd, glad you got it working. The signal sounds pretty much like a pure tone when monitoring on my transceiver. Rick. Ka4ohm. 

Sent from my iPad

> On Mar 27, 2017, at 7:53 PM, todd <nexstar1 at hughes.net> wrote:
> 
> Ok think that I got it. Only did the sudo rpi-update after the complete reload and then a reboot. Works but don't know what the signal is supposed to sound kike. Will do the other updates later and see if it still works.
> 
> Thanks all for the feedback.
> 
> Todd wd6dfh
> 
> --------------------------------------------------
> From: <hfsig-request at tapr.org>
> Sent: Monday, March 27, 2017 2:55 PM
> To: <hfsig at tapr.org>
> Subject: hfsig Digest, Vol 31, Issue 2
> 
>> Send hfsig mailing list submissions to
>> hfsig at tapr.org
>> 
>> To subscribe or unsubscribe via the World Wide Web, visit
>> http://www.tapr.org/mailman/listinfo/hfsig
>> or, via email, send a message with subject or body 'help' to
>> hfsig-request at tapr.org
>> 
>> You can reach the person managing the list at
>> hfsig-owner at tapr.org
>> 
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of hfsig digest..."
>> 
>> 
>> Today's Topics:
>> 
>>  1. Problem with operation (todd)
>>  2. Re: Problem with operation (Bob Cutter)
>>  3. Re: Problem with operation (Dennis Hall)
>>  4. Re: Problem with operation (Richard Waller)
>> 
>> 
>> ----------------------------------------------------------------------
>> 
>> Message: 1
>> Date: Mon, 27 Mar 2017 09:45:49 -0800
>> From: "todd" <nexstar1 at hughes.net>
>> To: <hfsig at tapr.org>
>> Subject: [hfsig] Problem with operation
>> Message-ID: <59E7930EDE7F429C860CA16EC7B8B6FA at LivingroomPc>
>> Content-Type: text/plain; charset="iso-8859-1"
>> 
>> Received my wspr board and installed it in a Raspberry Pi 3B board(no problem here).
>> Went through the latest install instructions in which everything seemed ok.
>> I then typed this in:
>> wspr  -r -o -s wd6dfh CN84ke 20 20m    enter
>> 
>> and I get this message   can't open /dev/mem
>> Then it just stops. Did this not get installed when I set it up or does it have to be set up after the install? Am a rank noob when it comes to Linux.
>> 
>> If I use the old way:
>> sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m
>> 
>> the screen locks up and the power to the Raspberry has to be removed to re-boot.
>> 
>> Any help would be much appreciated.
>> 
>> Thanks
>> Todd  WD6DFH
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <http://www.tapr.org/pipermail/hfsig/attachments/20170327/27dbca06/attachment-0001.html>
>> 
>> ------------------------------
>> 
>> Message: 2
>> Date: Mon, 27 Mar 2017 17:59:18 +0000 (UTC)
>> From: Bob Cutter <ki0g at yahoo.com>
>> To: TAPR HF Modes SIG Mailing List <hfsig at tapr.org>
>> Subject: Re: [hfsig] Problem with operation
>> Message-ID: <1795269654.4605517.1490637558675 at mail.yahoo.com>
>> Content-Type: text/plain; charset="utf-8"
>> 
>> blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white !important; } Try:
>> cd wsprrypi
>> Then
>> sudo......
>> Bob KI0G
>> 
>> 
>> Sent from Yahoo Mail for iPhone
>> 
>> 
>> On Monday, March 27, 2017, 12:48 PM, todd <nexstar1 at hughes.net> wrote:
>> 
>> Received my wspr board and installed it in a Raspberry Pi 3B board(no problem here).Went through the latest install instructions in which everything seemed ok. I then typed this in:wspr  -r -o -s wd6dfh CN84ke 20 20m    enter and I get this message   can't open /dev/memThen it just stops. Did this not get installed when I set it up or does it have to be set up after the install? Am a rank noob when it comes to Linux. If I use the old way:sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m the screen locks up and the power to the Raspberry has to be removed to re-boot. Any help would be much appreciated. ThanksTodd WD6DFH_______________________________________________
>> hfsig mailing list
>> hfsig at tapr.org
>> http://www.tapr.org/mailman/listinfo/hfsig
>> 
>> 
>> 
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <http://www.tapr.org/pipermail/hfsig/attachments/20170327/85991353/attachment-0001.html>
>> 
>> ------------------------------
>> 
>> Message: 3
>> Date: Mon, 27 Mar 2017 11:18:53 -0700
>> From: Dennis Hall <dennis at kk7x.us>
>> To: TAPR HF Modes SIG Mailing List <hfsig at tapr.org>
>> Subject: Re: [hfsig] Problem with operation
>> Message-ID:
>> <CALKJWmXucEB5ajpNi+3x84z5MAamN+Su_UUeGfHYNpFm=84dhA at mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>> 
>> CD WsprryPi
>> 
>>> On Mon, Mar 27, 2017 at 10:59 AM, Bob Cutter <ki0g at yahoo.com> wrote:
>>> 
>>> Try:
>>> 
>>> cd wsprrypi
>>> 
>>> Then
>>> 
>>> sudo......
>>> 
>>> Bob KI0G
>>> 
>>> 
>>> Sent from Yahoo Mail for iPhone <https://yho.com/footer0>
>>> 
>>> On Monday, March 27, 2017, 12:48 PM, todd <nexstar1 at hughes.net> wrote:
>>> 
>>> *Received my wspr board and installed it in a Raspberry Pi 3B board(no
>>> problem here).*
>>> *Went through the latest install instructions in which everything seemed
>>> ok. *
>>> *I then typed this in:*
>>> *wspr  -r -o -s wd6dfh CN84ke 20 20m    enter*
>>> 
>>> *and I get this message   can't open /dev/mem*
>>> *Then it just stops. Did this not get installed when I set it up or does
>>> it have to be set up after the install? Am a rank noob when it comes to
>>> Linux.*
>>> 
>>> *If I use the old way:*
>>> *sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m*
>>> 
>>> *the screen locks up and the power to the Raspberry has to be removed to
>>> re-boot.*
>>> 
>>> *Any help would be much appreciated.*
>>> 
>>> *Thanks*
>>> *Todd  WD6DFH*
>>> _______________________________________________
>>> hfsig mailing list
>>> hfsig at tapr.org
>>> http://www.tapr.org/mailman/listinfo/hfsig
>>> 
>>> 
>>> _______________________________________________
>>> hfsig mailing list
>>> hfsig at tapr.org
>>> http://www.tapr.org/mailman/listinfo/hfsig
>>> 
>>> 
>> 
>> 
>> -- 
>> http://rathdrumweather.us
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <http://www.tapr.org/pipermail/hfsig/attachments/20170327/13bb2b33/attachment-0001.html>
>> 
>> ------------------------------
>> 
>> Message: 4
>> Date: Mon, 27 Mar 2017 18:54:59 -0400
>> From: Richard Waller <rewaller at verizon.net>
>> To: TAPR HF Modes SIG Mailing List <hfsig at tapr.org>
>> Subject: Re: [hfsig] Problem with operation
>> Message-ID: <16EF47CA-99F8-4033-92D6-3887556A39C4 at verizon.net>
>> Content-Type: text/plain; charset="utf-8"
>> 
>> Todd, I'm a noob too but you need to type sudo ./wspr then the rest of it starting with -r. Also make sure you are in the WsprryPi directory
>> 
>> Sent from my iPad
>> 
>>> On Mar 27, 2017, at 1:45 PM, todd <nexstar1 at hughes.net> wrote:
>>> 
>>> Received my wspr board and installed it in a Raspberry Pi 3B board(no problem here).
>>> Went through the latest install instructions in which everything seemed ok.
>>> I then typed this in:
>>> wspr  -r -o -s wd6dfh CN84ke 20 20m    enter
>>> 
>>> and I get this message   can't open /dev/mem
>>> Then it just stops. Did this not get installed when I set it up or does it have to be set up after the install? Am a rank noob when it comes to Linux.
>>> 
>>> If I use the old way:
>>> sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m
>>> 
>>> the screen locks up and the power to the Raspberry has to be removed to re-boot.
>>> 
>>> Any help would be much appreciated.
>>> 
>>> Thanks
>>> Todd  WD6DFH
>>> _______________________________________________
>>> hfsig mailing list
>>> hfsig at tapr.org
>>> http://www.tapr.org/mailman/listinfo/hfsig
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <http://www.tapr.org/pipermail/hfsig/attachments/20170327/a73c8117/attachment.html>
>> 
>> ------------------------------
>> 
>> Subject: Digest Footer
>> 
>> _______________________________________________
>> hfsig mailing list
>> hfsig at tapr.org
>> http://www.tapr.org/mailman/listinfo/hfsig
>> 
>> 
>> ------------------------------
>> 
>> End of hfsig Digest, Vol 31, Issue 2
>> ************************************
> _______________________________________________
> hfsig mailing list
> hfsig at tapr.org
> http://www.tapr.org/mailman/listinfo/hfsig



More information about the hfsig mailing list