[hfsig] Problem with operation

Jerry Davis jdawgaz at gmail.com
Tue Mar 28 09:32:07 CDT 2017


I've had mine going continuously for a little over 2 months.

I am K7AZJ, and my QTH is Phoenix. I have gotten as far away as Eastern
Russia, and Hawaii. Mostly US, and Canada.

Running with a dedicated Rpi 2 and 20m vertical.

For those who profess to be Noobies. Let me explain a little.

The reason you have to put sudo in front of the command is because the pi
user does not have the privileges it needs to run. By putting sudo in
front, you "become" root (which is the all powerful user, on unix and linux
systems).

The reason you must be in the directory to run it, is because you told it
so on the command line.

./ means run from the current directory (hence the dot).

You could easily run it from anywhere as long as the path was right. So if
you had the wspr executable in a directory named bin in your home directory
then
"sudo /home/pi/bin/wspr" would be just as good. I moved my executable to my
bin directory and run it that way, myself.

Also according to the README file, I added several 0's at the end of the
command to only transmit every 30 minutes (14 0's I think). I feel that
every 2 minutes is too frequently for me.

Anyway, I hope my explanation is helpful to some.

Jerry



--
Extra Ham Operator: K7AZJ
Registered Linux User: 275424
Raspberry Pi and Openscad developer


*The most exciting phrase to hear in science - the one that heralds new
discoveries - is not "Eureka!" but "That's funny...".*- Isaac. Asimov

On Mon, Mar 27, 2017 at 5:52 PM, Richard Waller <rewaller at verizon.net>
wrote:

> Todd, I ran mine for about ten minutes. My qth is central Virginia. My
> signal was heard all over the u.s. and as far as Western Canada. I'm
> figuring close to 40,000 miles per watt. I'm using an endfed halfwave
> antenna. Amazing stuff. Rick. Ka4ohm.
>
> Sent from my iPad
>
> > On Mar 27, 2017, at 8:48 PM, todd <nexstar1 at hughes.net> wrote:
> >
> > Thanks for the reply Brad and Richard,
> > I am going to leave things alone and not do any more updates for awhile
> and see how it goes.
> > Yup my signal is mostly like a tone so guess things are working.
> > Time to get it in the shack and hooked up to a 20m antenna.
> > Thanks again
> > Todd
> >
> >
> > --------------------------------------------------
> > From: <hfsig-request at tapr.org>
> > Sent: Monday, March 27, 2017 4:24 PM
> > To: <hfsig at tapr.org>
> > Subject: hfsig Digest, Vol 31, Issue 3
> >
> >> Send hfsig mailing list submissions to
> >> hfsig at tapr.org
> >>
> >> To subscribe or unsubscribe via the World Wide Web, visit
> >> http://www.tapr.org/mailman/listinfo/hfsig
> >> or, via email, send a message with subject or body 'help' to
> >> hfsig-request at tapr.org
> >>
> >> You can reach the person managing the list at
> >> hfsig-owner at tapr.org
> >>
> >> When replying, please edit your Subject line so it is more specific
> >> than "Re: Contents of hfsig digest..."
> >>
> >>
> >> Today's Topics:
> >>
> >>  1. Re: hfsig Digest, Vol 31, Issue 2 (todd)
> >>  2. Re: Problem with operation (Brad Farr)
> >>  3. Re: hfsig Digest, Vol 31, Issue 2 (todd)
> >>  4. Re: hfsig Digest, Vol 31, Issue 2 (Richard Waller)
> >>
> >>
> >> ----------------------------------------------------------------------
> >>
> >> Message: 1
> >> Date: Mon, 27 Mar 2017 15:17:30 -0800
> >> From: "todd" <nexstar1 at hughes.net>
> >> To: <hfsig at tapr.org>
> >> Subject: Re: [hfsig] hfsig Digest, Vol 31, Issue 2
> >> Message-ID: <A3862F1AB56C4B3CA08CB1A5753544B4 at LivingroomPc>
> >> Content-Type: text/plain; format=flowed; charset="utf-8";
> >> reply-type=original
> >>
> >> Thanks for the reply Bob, That’s what  I did. Was in  "cd WsprryPi "
> Doing a
> >> complete reload. Ended up that the green light flashed every one second
> and
> >> couldn't stop it even with a reboot.
> >>
> >> When I typed    sudo ./wsp -r -o -s wd6dfh CN84ke 20 20m   it locked up
> the
> >> Pi 3B and had to recycle the power. Nothing worked, mouse or keyboard.
> >>
> >> Thanks Richard.......That is the string that I used and it would lock
> up the
> >> Pi 3B and as above had to cycle the power.
> >>
> >> Also when I install the board the green LED starts
> blinking........Thinking
> >> that I have a bad Pi 3b or the firmware is corrupted.
> >>
> >> Did all the updates prior to trying the board.
> >>
> >> Todd
> >>
> >> --------------------------------------------------
> >> From: <hfsig-request at tapr.org>
> >> Sent: Monday, March 27, 2017 2:55 PM
> >> To: <hfsig at tapr.org>
> >> Subject: hfsig Digest, Vol 31, Issue 2
> >>
> >>> Send hfsig mailing list submissions to
> >>> hfsig at tapr.org
> >>>
> >>> To subscribe or unsubscribe via the World Wide Web, visit
> >>> http://www.tapr.org/mailman/listinfo/hfsig
> >>> or, via email, send a message with subject or body 'help' to
> >>> hfsig-request at tapr.org
> >>>
> >>> You can reach the person managing the list at
> >>> hfsig-owner at tapr.org
> >>>
> >>> When replying, please edit your Subject line so it is more specific
> >>> than "Re: Contents of hfsig digest..."
> >>>
> >>>
> >>> Today's Topics:
> >>>
> >>>  1. Problem with operation (todd)
> >>>  2. Re: Problem with operation (Bob Cutter)
> >>>  3. Re: Problem with operation (Dennis Hall)
> >>>  4. Re: Problem with operation (Richard Waller)
> >>>
> >>>
> >>> ----------------------------------------------------------------------
> >>>
> >>> Message: 1
> >>> Date: Mon, 27 Mar 2017 09:45:49 -0800
> >>> From: "todd" <nexstar1 at hughes.net>
> >>> To: <hfsig at tapr.org>
> >>> Subject: [hfsig] Problem with operation
> >>> Message-ID: <59E7930EDE7F429C860CA16EC7B8B6FA at LivingroomPc>
> >>> Content-Type: text/plain; charset="iso-8859-1"
> >>>
> >>> Received my wspr board and installed it in a Raspberry Pi 3B board(no
> >>> problem here).
> >>> Went through the latest install instructions in which everything seemed
> >>> ok.
> >>> I then typed this in:
> >>> wspr  -r -o -s wd6dfh CN84ke 20 20m    enter
> >>>
> >>> and I get this message   can't open /dev/mem
> >>> Then it just stops. Did this not get installed when I set it up or
> does it
> >>> have to be set up after the install? Am a rank noob when it comes to
> >>> Linux.
> >>>
> >>> If I use the old way:
> >>> sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m
> >>>
> >>> the screen locks up and the power to the Raspberry has to be removed to
> >>> re-boot.
> >>>
> >>> Any help would be much appreciated.
> >>>
> >>> Thanks
> >>> Todd  WD6DFH
> >>> -------------- next part --------------
> >>> An HTML attachment was scrubbed...
> >>> URL:
> >>> <http://www.tapr.org/pipermail/hfsig/attachments/
> 20170327/27dbca06/attachment-0001.html>
> >>>
> >>> ------------------------------
> >>>
> >>> Message: 2
> >>> Date: Mon, 27 Mar 2017 17:59:18 +0000 (UTC)
> >>> From: Bob Cutter <ki0g at yahoo.com>
> >>> To: TAPR HF Modes SIG Mailing List <hfsig at tapr.org>
> >>> Subject: Re: [hfsig] Problem with operation
> >>> Message-ID: <1795269654.4605517.1490637558675 at mail.yahoo.com>
> >>> Content-Type: text/plain; charset="utf-8"
> >>>
> >>> blockquote, div.yahoo_quoted { margin-left: 0 !important;
> border-left:1px
> >>> #715FFA solid !important; padding-left:1ex !important;
> >>> background-color:white !important; } Try:
> >>> cd wsprrypi
> >>> Then
> >>> sudo......
> >>> Bob KI0G
> >>>
> >>>
> >>> Sent from Yahoo Mail for iPhone
> >>>
> >>>
> >>> On Monday, March 27, 2017, 12:48 PM, todd <nexstar1 at hughes.net> wrote:
> >>>
> >>> Received my wspr board and installed it in a Raspberry Pi 3B board(no
> >>> problem here).Went through the latest install instructions in which
> >>> everything seemed ok. I then typed this in:wspr  -r -o -s wd6dfh
> CN84ke 20
> >>> 20m    enter and I get this message   can't open /dev/memThen it just
> >>> stops. Did this not get installed when I set it up or does it have to
> be
> >>> set up after the install? Am a rank noob when it comes to Linux. If I
> use
> >>> the old way:sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m the screen locks
> up
> >>> and the power to the Raspberry has to be removed to re-boot. Any help
> >>> would be much appreciated. ThanksTodd
> >>> WD6DFH_______________________________________________
> >>> hfsig mailing list
> >>> hfsig at tapr.org
> >>> http://www.tapr.org/mailman/listinfo/hfsig
> >>>
> >>>
> >>>
> >>> -------------- next part --------------
> >>> An HTML attachment was scrubbed...
> >>> URL:
> >>> <http://www.tapr.org/pipermail/hfsig/attachments/
> 20170327/85991353/attachment-0001.html>
> >>>
> >>> ------------------------------
> >>>
> >>> Message: 3
> >>> Date: Mon, 27 Mar 2017 11:18:53 -0700
> >>> From: Dennis Hall <dennis at kk7x.us>
> >>> To: TAPR HF Modes SIG Mailing List <hfsig at tapr.org>
> >>> Subject: Re: [hfsig] Problem with operation
> >>> Message-ID:
> >>> <CALKJWmXucEB5ajpNi+3x84z5MAamN+Su_UUeGfHYNpFm=84dhA at mail.gmail.com>
> >>> Content-Type: text/plain; charset="utf-8"
> >>>
> >>> CD WsprryPi
> >>>
> >>>> On Mon, Mar 27, 2017 at 10:59 AM, Bob Cutter <ki0g at yahoo.com> wrote:
> >>>>
> >>>> Try:
> >>>>
> >>>> cd wsprrypi
> >>>>
> >>>> Then
> >>>>
> >>>> sudo......
> >>>>
> >>>> Bob KI0G
> >>>>
> >>>>
> >>>> Sent from Yahoo Mail for iPhone <https://yho.com/footer0>
> >>>>
> >>>> On Monday, March 27, 2017, 12:48 PM, todd <nexstar1 at hughes.net>
> wrote:
> >>>>
> >>>> *Received my wspr board and installed it in a Raspberry Pi 3B board(no
> >>>> problem here).*
> >>>> *Went through the latest install instructions in which everything
> seemed
> >>>> ok. *
> >>>> *I then typed this in:*
> >>>> *wspr  -r -o -s wd6dfh CN84ke 20 20m    enter*
> >>>>
> >>>> *and I get this message   can't open /dev/mem*
> >>>> *Then it just stops. Did this not get installed when I set it up or
> does
> >>>> it have to be set up after the install? Am a rank noob when it comes
> to
> >>>> Linux.*
> >>>>
> >>>> *If I use the old way:*
> >>>> *sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m*
> >>>>
> >>>> *the screen locks up and the power to the Raspberry has to be removed
> to
> >>>> re-boot.*
> >>>>
> >>>> *Any help would be much appreciated.*
> >>>>
> >>>> *Thanks*
> >>>> *Todd  WD6DFH*
> >>>> _______________________________________________
> >>>> hfsig mailing list
> >>>> hfsig at tapr.org
> >>>> http://www.tapr.org/mailman/listinfo/hfsig
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> hfsig mailing list
> >>>> hfsig at tapr.org
> >>>> http://www.tapr.org/mailman/listinfo/hfsig
> >>>>
> >>>>
> >>>
> >>>
> >>> --
> >>> http://rathdrumweather.us
> >>> -------------- next part --------------
> >>> An HTML attachment was scrubbed...
> >>> URL:
> >>> <http://www.tapr.org/pipermail/hfsig/attachments/
> 20170327/13bb2b33/attachment-0001.html>
> >>>
> >>> ------------------------------
> >>>
> >>> Message: 4
> >>> Date: Mon, 27 Mar 2017 18:54:59 -0400
> >>> From: Richard Waller <rewaller at verizon.net>
> >>> To: TAPR HF Modes SIG Mailing List <hfsig at tapr.org>
> >>> Subject: Re: [hfsig] Problem with operation
> >>> Message-ID: <16EF47CA-99F8-4033-92D6-3887556A39C4 at verizon.net>
> >>> Content-Type: text/plain; charset="utf-8"
> >>>
> >>> Todd, I'm a noob too but you need to type sudo ./wspr then the rest of
> it
> >>> starting with -r. Also make sure you are in the WsprryPi directory
> >>>
> >>> Sent from my iPad
> >>>
> >>>> On Mar 27, 2017, at 1:45 PM, todd <nexstar1 at hughes.net> wrote:
> >>>>
> >>>> Received my wspr board and installed it in a Raspberry Pi 3B board(no
> >>>> problem here).
> >>>> Went through the latest install instructions in which everything
> seemed
> >>>> ok.
> >>>> I then typed this in:
> >>>> wspr  -r -o -s wd6dfh CN84ke 20 20m    enter
> >>>>
> >>>> and I get this message   can't open /dev/mem
> >>>> Then it just stops. Did this not get installed when I set it up or
> does
> >>>> it have to be set up after the install? Am a rank noob when it comes
> to
> >>>> Linux.
> >>>>
> >>>> If I use the old way:
> >>>> sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m
> >>>>
> >>>> the screen locks up and the power to the Raspberry has to be removed
> to
> >>>> re-boot.
> >>>>
> >>>> Any help would be much appreciated.
> >>>>
> >>>> Thanks
> >>>> Todd  WD6DFH
> >>>> _______________________________________________
> >>>> hfsig mailing list
> >>>> hfsig at tapr.org
> >>>> http://www.tapr.org/mailman/listinfo/hfsig
> >>> -------------- next part --------------
> >>> An HTML attachment was scrubbed...
> >>> URL:
> >>> <http://www.tapr.org/pipermail/hfsig/attachments/
> 20170327/a73c8117/attachment.html>
> >>>
> >>> ------------------------------
> >>>
> >>> Subject: Digest Footer
> >>>
> >>> _______________________________________________
> >>> hfsig mailing list
> >>> hfsig at tapr.org
> >>> http://www.tapr.org/mailman/listinfo/hfsig
> >>>
> >>>
> >>> ------------------------------
> >>>
> >>> End of hfsig Digest, Vol 31, Issue 2
> >>> ************************************
> >>>
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 2
> >> Date: Mon, 27 Mar 2017 18:59:15 -0400
> >> From: Brad Farr <taprsig at unsupported.org>
> >> To: TAPR HF Modes SIG Mailing List <hfsig at tapr.org>
> >> Subject: Re: [hfsig] Problem with operation
> >> Message-ID: <AEA8A360-2D3B-4204-86B5-47601D3BBB78 at unsupported.org>
> >> Content-Type: text/plain; charset="utf-8"
> >>
> >>
> >>> On Mar 27, 2017, at 1:45 PM, todd <nexstar1 at hughes.net> wrote:
> >>>
> >>> If I use the old way:
> >>> sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m
> >>>
> >>> the screen locks up and the power to the Raspberry has to be removed
> to re-boot.
> >>>
> >>
> >> I also had the RaspberryPI freeze up. Using the latest Raspbian, and
> Raspberry Pi 3, if I had other applications open and running then wspr
> would freeze up the machine. If wspr was the only app running, I had no
> problems. I didn’t experience freezes with the older Raspbian versions.
> Doesn’t make sense, because it seemed to have plenty of memory and disk
> space, but that was my observation.
> >>
> >> Brad
> >> -------------- next part --------------
> >> An HTML attachment was scrubbed...
> >> URL: <http://www.tapr.org/pipermail/hfsig/attachments/
> 20170327/20ca884b/attachment-0001.html>
> >>
> >> ------------------------------
> >>
> >> Message: 3
> >> Date: Mon, 27 Mar 2017 15:53:04 -0800
> >> From: "todd" <nexstar1 at hughes.net>
> >> To: <hfsig at tapr.org>
> >> Subject: Re: [hfsig] hfsig Digest, Vol 31, Issue 2
> >> Message-ID: <8D107CC5424E4C4181B520E4904BEC94 at LivingroomPc>
> >> Content-Type: text/plain; format=flowed; charset="utf-8";
> >> reply-type=original
> >>
> >> Ok think that I got it. Only did the sudo rpi-update after the complete
> >> reload and then a reboot. Works but don't know what the signal is
> supposed
> >> to sound kike. Will do the other updates later and see if it still
> works.
> >>
> >> Thanks all for the feedback.
> >>
> >> Todd wd6dfh
> >>
> >> --------------------------------------------------
> >> From: <hfsig-request at tapr.org>
> >> Sent: Monday, March 27, 2017 2:55 PM
> >> To: <hfsig at tapr.org>
> >> Subject: hfsig Digest, Vol 31, Issue 2
> >>
> >>> Send hfsig mailing list submissions to
> >>> hfsig at tapr.org
> >>>
> >>> To subscribe or unsubscribe via the World Wide Web, visit
> >>> http://www.tapr.org/mailman/listinfo/hfsig
> >>> or, via email, send a message with subject or body 'help' to
> >>> hfsig-request at tapr.org
> >>>
> >>> You can reach the person managing the list at
> >>> hfsig-owner at tapr.org
> >>>
> >>> When replying, please edit your Subject line so it is more specific
> >>> than "Re: Contents of hfsig digest..."
> >>>
> >>>
> >>> Today's Topics:
> >>>
> >>>  1. Problem with operation (todd)
> >>>  2. Re: Problem with operation (Bob Cutter)
> >>>  3. Re: Problem with operation (Dennis Hall)
> >>>  4. Re: Problem with operation (Richard Waller)
> >>>
> >>>
> >>> ----------------------------------------------------------------------
> >>>
> >>> Message: 1
> >>> Date: Mon, 27 Mar 2017 09:45:49 -0800
> >>> From: "todd" <nexstar1 at hughes.net>
> >>> To: <hfsig at tapr.org>
> >>> Subject: [hfsig] Problem with operation
> >>> Message-ID: <59E7930EDE7F429C860CA16EC7B8B6FA at LivingroomPc>
> >>> Content-Type: text/plain; charset="iso-8859-1"
> >>>
> >>> Received my wspr board and installed it in a Raspberry Pi 3B board(no
> >>> problem here).
> >>> Went through the latest install instructions in which everything seemed
> >>> ok.
> >>> I then typed this in:
> >>> wspr  -r -o -s wd6dfh CN84ke 20 20m    enter
> >>>
> >>> and I get this message   can't open /dev/mem
> >>> Then it just stops. Did this not get installed when I set it up or
> does it
> >>> have to be set up after the install? Am a rank noob when it comes to
> >>> Linux.
> >>>
> >>> If I use the old way:
> >>> sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m
> >>>
> >>> the screen locks up and the power to the Raspberry has to be removed to
> >>> re-boot.
> >>>
> >>> Any help would be much appreciated.
> >>>
> >>> Thanks
> >>> Todd  WD6DFH
> >>> -------------- next part --------------
> >>> An HTML attachment was scrubbed...
> >>> URL:
> >>> <http://www.tapr.org/pipermail/hfsig/attachments/
> 20170327/27dbca06/attachment-0001.html>
> >>>
> >>> ------------------------------
> >>>
> >>> Message: 2
> >>> Date: Mon, 27 Mar 2017 17:59:18 +0000 (UTC)
> >>> From: Bob Cutter <ki0g at yahoo.com>
> >>> To: TAPR HF Modes SIG Mailing List <hfsig at tapr.org>
> >>> Subject: Re: [hfsig] Problem with operation
> >>> Message-ID: <1795269654.4605517.1490637558675 at mail.yahoo.com>
> >>> Content-Type: text/plain; charset="utf-8"
> >>>
> >>> blockquote, div.yahoo_quoted { margin-left: 0 !important;
> border-left:1px
> >>> #715FFA solid !important; padding-left:1ex !important;
> >>> background-color:white !important; } Try:
> >>> cd wsprrypi
> >>> Then
> >>> sudo......
> >>> Bob KI0G
> >>>
> >>>
> >>> Sent from Yahoo Mail for iPhone
> >>>
> >>>
> >>> On Monday, March 27, 2017, 12:48 PM, todd <nexstar1 at hughes.net> wrote:
> >>>
> >>> Received my wspr board and installed it in a Raspberry Pi 3B board(no
> >>> problem here).Went through the latest install instructions in which
> >>> everything seemed ok. I then typed this in:wspr  -r -o -s wd6dfh
> CN84ke 20
> >>> 20m    enter and I get this message   can't open /dev/memThen it just
> >>> stops. Did this not get installed when I set it up or does it have to
> be
> >>> set up after the install? Am a rank noob when it comes to Linux. If I
> use
> >>> the old way:sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m the screen locks
> up
> >>> and the power to the Raspberry has to be removed to re-boot. Any help
> >>> would be much appreciated. ThanksTodd
> >>> WD6DFH_______________________________________________
> >>> hfsig mailing list
> >>> hfsig at tapr.org
> >>> http://www.tapr.org/mailman/listinfo/hfsig
> >>>
> >>>
> >>>
> >>> -------------- next part --------------
> >>> An HTML attachment was scrubbed...
> >>> URL:
> >>> <http://www.tapr.org/pipermail/hfsig/attachments/
> 20170327/85991353/attachment-0001.html>
> >>>
> >>> ------------------------------
> >>>
> >>> Message: 3
> >>> Date: Mon, 27 Mar 2017 11:18:53 -0700
> >>> From: Dennis Hall <dennis at kk7x.us>
> >>> To: TAPR HF Modes SIG Mailing List <hfsig at tapr.org>
> >>> Subject: Re: [hfsig] Problem with operation
> >>> Message-ID:
> >>> <CALKJWmXucEB5ajpNi+3x84z5MAamN+Su_UUeGfHYNpFm=84dhA at mail.gmail.com>
> >>> Content-Type: text/plain; charset="utf-8"
> >>>
> >>> CD WsprryPi
> >>>
> >>>> On Mon, Mar 27, 2017 at 10:59 AM, Bob Cutter <ki0g at yahoo.com> wrote:
> >>>>
> >>>> Try:
> >>>>
> >>>> cd wsprrypi
> >>>>
> >>>> Then
> >>>>
> >>>> sudo......
> >>>>
> >>>> Bob KI0G
> >>>>
> >>>>
> >>>> Sent from Yahoo Mail for iPhone <https://yho.com/footer0>
> >>>>
> >>>> On Monday, March 27, 2017, 12:48 PM, todd <nexstar1 at hughes.net>
> wrote:
> >>>>
> >>>> *Received my wspr board and installed it in a Raspberry Pi 3B board(no
> >>>> problem here).*
> >>>> *Went through the latest install instructions in which everything
> seemed
> >>>> ok. *
> >>>> *I then typed this in:*
> >>>> *wspr  -r -o -s wd6dfh CN84ke 20 20m    enter*
> >>>>
> >>>> *and I get this message   can't open /dev/mem*
> >>>> *Then it just stops. Did this not get installed when I set it up or
> does
> >>>> it have to be set up after the install? Am a rank noob when it comes
> to
> >>>> Linux.*
> >>>>
> >>>> *If I use the old way:*
> >>>> *sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m*
> >>>>
> >>>> *the screen locks up and the power to the Raspberry has to be removed
> to
> >>>> re-boot.*
> >>>>
> >>>> *Any help would be much appreciated.*
> >>>>
> >>>> *Thanks*
> >>>> *Todd  WD6DFH*
> >>>> _______________________________________________
> >>>> hfsig mailing list
> >>>> hfsig at tapr.org
> >>>> http://www.tapr.org/mailman/listinfo/hfsig
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> hfsig mailing list
> >>>> hfsig at tapr.org
> >>>> http://www.tapr.org/mailman/listinfo/hfsig
> >>>>
> >>>>
> >>>
> >>>
> >>> --
> >>> http://rathdrumweather.us
> >>> -------------- next part --------------
> >>> An HTML attachment was scrubbed...
> >>> URL:
> >>> <http://www.tapr.org/pipermail/hfsig/attachments/
> 20170327/13bb2b33/attachment-0001.html>
> >>>
> >>> ------------------------------
> >>>
> >>> Message: 4
> >>> Date: Mon, 27 Mar 2017 18:54:59 -0400
> >>> From: Richard Waller <rewaller at verizon.net>
> >>> To: TAPR HF Modes SIG Mailing List <hfsig at tapr.org>
> >>> Subject: Re: [hfsig] Problem with operation
> >>> Message-ID: <16EF47CA-99F8-4033-92D6-3887556A39C4 at verizon.net>
> >>> Content-Type: text/plain; charset="utf-8"
> >>>
> >>> Todd, I'm a noob too but you need to type sudo ./wspr then the rest of
> it
> >>> starting with -r. Also make sure you are in the WsprryPi directory
> >>>
> >>> Sent from my iPad
> >>>
> >>>> On Mar 27, 2017, at 1:45 PM, todd <nexstar1 at hughes.net> wrote:
> >>>>
> >>>> Received my wspr board and installed it in a Raspberry Pi 3B board(no
> >>>> problem here).
> >>>> Went through the latest install instructions in which everything
> seemed
> >>>> ok.
> >>>> I then typed this in:
> >>>> wspr  -r -o -s wd6dfh CN84ke 20 20m    enter
> >>>>
> >>>> and I get this message   can't open /dev/mem
> >>>> Then it just stops. Did this not get installed when I set it up or
> does
> >>>> it have to be set up after the install? Am a rank noob when it comes
> to
> >>>> Linux.
> >>>>
> >>>> If I use the old way:
> >>>> sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m
> >>>>
> >>>> the screen locks up and the power to the Raspberry has to be removed
> to
> >>>> re-boot.
> >>>>
> >>>> Any help would be much appreciated.
> >>>>
> >>>> Thanks
> >>>> Todd  WD6DFH
> >>>> _______________________________________________
> >>>> hfsig mailing list
> >>>> hfsig at tapr.org
> >>>> http://www.tapr.org/mailman/listinfo/hfsig
> >>> -------------- next part --------------
> >>> An HTML attachment was scrubbed...
> >>> URL:
> >>> <http://www.tapr.org/pipermail/hfsig/attachments/
> 20170327/a73c8117/attachment.html>
> >>>
> >>> ------------------------------
> >>>
> >>> Subject: Digest Footer
> >>>
> >>> _______________________________________________
> >>> hfsig mailing list
> >>> hfsig at tapr.org
> >>> http://www.tapr.org/mailman/listinfo/hfsig
> >>>
> >>>
> >>> ------------------------------
> >>>
> >>> End of hfsig Digest, Vol 31, Issue 2
> >>> ************************************
> >>>
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 4
> >> Date: Mon, 27 Mar 2017 20:24:22 -0400
> >> From: Richard Waller <rewaller at verizon.net>
> >> To: TAPR HF Modes SIG Mailing List <hfsig at tapr.org>
> >> Subject: Re: [hfsig] hfsig Digest, Vol 31, Issue 2
> >> Message-ID: <ECB85FEC-CC4B-41A3-A809-00C83B3EFB50 at verizon.net>
> >> Content-Type: text/plain; charset=us-ascii
> >>
> >> Todd, glad you got it working. The signal sounds pretty much like a
> pure tone when monitoring on my transceiver. Rick. Ka4ohm.
> >>
> >> Sent from my iPad
> >>
> >>> On Mar 27, 2017, at 7:53 PM, todd <nexstar1 at hughes.net> wrote:
> >>>
> >>> Ok think that I got it. Only did the sudo rpi-update after the
> complete reload and then a reboot. Works but don't know what the signal is
> supposed to sound kike. Will do the other updates later and see if it still
> works.
> >>>
> >>> Thanks all for the feedback.
> >>>
> >>> Todd wd6dfh
> >>>
> >>> --------------------------------------------------
> >>> From: <hfsig-request at tapr.org>
> >>> Sent: Monday, March 27, 2017 2:55 PM
> >>> To: <hfsig at tapr.org>
> >>> Subject: hfsig Digest, Vol 31, Issue 2
> >>>
> >>>> Send hfsig mailing list submissions to
> >>>> hfsig at tapr.org
> >>>>
> >>>> To subscribe or unsubscribe via the World Wide Web, visit
> >>>> http://www.tapr.org/mailman/listinfo/hfsig
> >>>> or, via email, send a message with subject or body 'help' to
> >>>> hfsig-request at tapr.org
> >>>>
> >>>> You can reach the person managing the list at
> >>>> hfsig-owner at tapr.org
> >>>>
> >>>> When replying, please edit your Subject line so it is more specific
> >>>> than "Re: Contents of hfsig digest..."
> >>>>
> >>>>
> >>>> Today's Topics:
> >>>>
> >>>> 1. Problem with operation (todd)
> >>>> 2. Re: Problem with operation (Bob Cutter)
> >>>> 3. Re: Problem with operation (Dennis Hall)
> >>>> 4. Re: Problem with operation (Richard Waller)
> >>>>
> >>>>
> >>>> ------------------------------------------------------------
> ----------
> >>>>
> >>>> Message: 1
> >>>> Date: Mon, 27 Mar 2017 09:45:49 -0800
> >>>> From: "todd" <nexstar1 at hughes.net>
> >>>> To: <hfsig at tapr.org>
> >>>> Subject: [hfsig] Problem with operation
> >>>> Message-ID: <59E7930EDE7F429C860CA16EC7B8B6FA at LivingroomPc>
> >>>> Content-Type: text/plain; charset="iso-8859-1"
> >>>>
> >>>> Received my wspr board and installed it in a Raspberry Pi 3B board(no
> problem here).
> >>>> Went through the latest install instructions in which everything
> seemed ok.
> >>>> I then typed this in:
> >>>> wspr  -r -o -s wd6dfh CN84ke 20 20m    enter
> >>>>
> >>>> and I get this message   can't open /dev/mem
> >>>> Then it just stops. Did this not get installed when I set it up or
> does it have to be set up after the install? Am a rank noob when it comes
> to Linux.
> >>>>
> >>>> If I use the old way:
> >>>> sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m
> >>>>
> >>>> the screen locks up and the power to the Raspberry has to be removed
> to re-boot.
> >>>>
> >>>> Any help would be much appreciated.
> >>>>
> >>>> Thanks
> >>>> Todd  WD6DFH
> >>>> -------------- next part --------------
> >>>> An HTML attachment was scrubbed...
> >>>> URL: <http://www.tapr.org/pipermail/hfsig/attachments/
> 20170327/27dbca06/attachment-0001.html>
> >>>>
> >>>> ------------------------------
> >>>>
> >>>> Message: 2
> >>>> Date: Mon, 27 Mar 2017 17:59:18 +0000 (UTC)
> >>>> From: Bob Cutter <ki0g at yahoo.com>
> >>>> To: TAPR HF Modes SIG Mailing List <hfsig at tapr.org>
> >>>> Subject: Re: [hfsig] Problem with operation
> >>>> Message-ID: <1795269654.4605517.1490637558675 at mail.yahoo.com>
> >>>> Content-Type: text/plain; charset="utf-8"
> >>>>
> >>>> blockquote, div.yahoo_quoted { margin-left: 0 !important;
> border-left:1px #715FFA solid !important; padding-left:1ex !important;
> background-color:white !important; } Try:
> >>>> cd wsprrypi
> >>>> Then
> >>>> sudo......
> >>>> Bob KI0G
> >>>>
> >>>>
> >>>> Sent from Yahoo Mail for iPhone
> >>>>
> >>>>
> >>>> On Monday, March 27, 2017, 12:48 PM, todd <nexstar1 at hughes.net>
> wrote:
> >>>>
> >>>> Received my wspr board and installed it in a Raspberry Pi 3B board(no
> problem here).Went through the latest install instructions in which
> everything seemed ok. I then typed this in:wspr  -r -o -s wd6dfh CN84ke 20
> 20m    enter and I get this message   can't open /dev/memThen it just
> stops. Did this not get installed when I set it up or does it have to be
> set up after the install? Am a rank noob when it comes to Linux. If I use
> the old way:sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m the screen locks up
> and the power to the Raspberry has to be removed to re-boot. Any help would
> be much appreciated. ThanksTodd WD6DFH________________________
> _______________________
> >>>> hfsig mailing list
> >>>> hfsig at tapr.org
> >>>> http://www.tapr.org/mailman/listinfo/hfsig
> >>>>
> >>>>
> >>>>
> >>>> -------------- next part --------------
> >>>> An HTML attachment was scrubbed...
> >>>> URL: <http://www.tapr.org/pipermail/hfsig/attachments/
> 20170327/85991353/attachment-0001.html>
> >>>>
> >>>> ------------------------------
> >>>>
> >>>> Message: 3
> >>>> Date: Mon, 27 Mar 2017 11:18:53 -0700
> >>>> From: Dennis Hall <dennis at kk7x.us>
> >>>> To: TAPR HF Modes SIG Mailing List <hfsig at tapr.org>
> >>>> Subject: Re: [hfsig] Problem with operation
> >>>> Message-ID:
> >>>> <CALKJWmXucEB5ajpNi+3x84z5MAamN+Su_UUeGfHYNpFm=84dhA at mail.gmail.com>
> >>>> Content-Type: text/plain; charset="utf-8"
> >>>>
> >>>> CD WsprryPi
> >>>>
> >>>>> On Mon, Mar 27, 2017 at 10:59 AM, Bob Cutter <ki0g at yahoo.com> wrote:
> >>>>>
> >>>>> Try:
> >>>>>
> >>>>> cd wsprrypi
> >>>>>
> >>>>> Then
> >>>>>
> >>>>> sudo......
> >>>>>
> >>>>> Bob KI0G
> >>>>>
> >>>>>
> >>>>> Sent from Yahoo Mail for iPhone <https://yho.com/footer0>
> >>>>>
> >>>>> On Monday, March 27, 2017, 12:48 PM, todd <nexstar1 at hughes.net>
> wrote:
> >>>>>
> >>>>> *Received my wspr board and installed it in a Raspberry Pi 3B
> board(no
> >>>>> problem here).*
> >>>>> *Went through the latest install instructions in which everything
> seemed
> >>>>> ok. *
> >>>>> *I then typed this in:*
> >>>>> *wspr  -r -o -s wd6dfh CN84ke 20 20m    enter*
> >>>>>
> >>>>> *and I get this message   can't open /dev/mem*
> >>>>> *Then it just stops. Did this not get installed when I set it up or
> does
> >>>>> it have to be set up after the install? Am a rank noob when it comes
> to
> >>>>> Linux.*
> >>>>>
> >>>>> *If I use the old way:*
> >>>>> *sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m*
> >>>>>
> >>>>> *the screen locks up and the power to the Raspberry has to be
> removed to
> >>>>> re-boot.*
> >>>>>
> >>>>> *Any help would be much appreciated.*
> >>>>>
> >>>>> *Thanks*
> >>>>> *Todd  WD6DFH*
> >>>>> _______________________________________________
> >>>>> hfsig mailing list
> >>>>> hfsig at tapr.org
> >>>>> http://www.tapr.org/mailman/listinfo/hfsig
> >>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>>> hfsig mailing list
> >>>>> hfsig at tapr.org
> >>>>> http://www.tapr.org/mailman/listinfo/hfsig
> >>>>>
> >>>>>
> >>>>
> >>>>
> >>>> --
> >>>> http://rathdrumweather.us
> >>>> -------------- next part --------------
> >>>> An HTML attachment was scrubbed...
> >>>> URL: <http://www.tapr.org/pipermail/hfsig/attachments/
> 20170327/13bb2b33/attachment-0001.html>
> >>>>
> >>>> ------------------------------
> >>>>
> >>>> Message: 4
> >>>> Date: Mon, 27 Mar 2017 18:54:59 -0400
> >>>> From: Richard Waller <rewaller at verizon.net>
> >>>> To: TAPR HF Modes SIG Mailing List <hfsig at tapr.org>
> >>>> Subject: Re: [hfsig] Problem with operation
> >>>> Message-ID: <16EF47CA-99F8-4033-92D6-3887556A39C4 at verizon.net>
> >>>> Content-Type: text/plain; charset="utf-8"
> >>>>
> >>>> Todd, I'm a noob too but you need to type sudo ./wspr then the rest
> of it starting with -r. Also make sure you are in the WsprryPi directory
> >>>>
> >>>> Sent from my iPad
> >>>>
> >>>>> On Mar 27, 2017, at 1:45 PM, todd <nexstar1 at hughes.net> wrote:
> >>>>>
> >>>>> Received my wspr board and installed it in a Raspberry Pi 3B
> board(no problem here).
> >>>>> Went through the latest install instructions in which everything
> seemed ok.
> >>>>> I then typed this in:
> >>>>> wspr  -r -o -s wd6dfh CN84ke 20 20m    enter
> >>>>>
> >>>>> and I get this message   can't open /dev/mem
> >>>>> Then it just stops. Did this not get installed when I set it up or
> does it have to be set up after the install? Am a rank noob when it comes
> to Linux.
> >>>>>
> >>>>> If I use the old way:
> >>>>> sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m
> >>>>>
> >>>>> the screen locks up and the power to the Raspberry has to be removed
> to re-boot.
> >>>>>
> >>>>> Any help would be much appreciated.
> >>>>>
> >>>>> Thanks
> >>>>> Todd  WD6DFH
> >>>>> _______________________________________________
> >>>>> hfsig mailing list
> >>>>> hfsig at tapr.org
> >>>>> http://www.tapr.org/mailman/listinfo/hfsig
> >>>> -------------- next part --------------
> >>>> An HTML attachment was scrubbed...
> >>>> URL: <http://www.tapr.org/pipermail/hfsig/attachments/
> 20170327/a73c8117/attachment.html>
> >>>>
> >>>> ------------------------------
> >>>>
> >>>> Subject: Digest Footer
> >>>>
> >>>> _______________________________________________
> >>>> hfsig mailing list
> >>>> hfsig at tapr.org
> >>>> http://www.tapr.org/mailman/listinfo/hfsig
> >>>>
> >>>>
> >>>> ------------------------------
> >>>>
> >>>> End of hfsig Digest, Vol 31, Issue 2
> >>>> ************************************
> >>> _______________________________________________
> >>> hfsig mailing list
> >>> hfsig at tapr.org
> >>> http://www.tapr.org/mailman/listinfo/hfsig
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> Subject: Digest Footer
> >>
> >> _______________________________________________
> >> hfsig mailing list
> >> hfsig at tapr.org
> >> http://www.tapr.org/mailman/listinfo/hfsig
> >>
> >>
> >> ------------------------------
> >>
> >> End of hfsig Digest, Vol 31, Issue 3
> >> ************************************
> > _______________________________________________
> > hfsig mailing list
> > hfsig at tapr.org
> > http://www.tapr.org/mailman/listinfo/hfsig
>
> _______________________________________________
> hfsig mailing list
> hfsig at tapr.org
> http://www.tapr.org/mailman/listinfo/hfsig
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/hfsig/attachments/20170328/eea5e716/attachment-0001.html>


More information about the hfsig mailing list