[nos-bbs] Re: AXUDP and APRS - configuring

[Andre v Schayk]

Demetre Valaris schreef:

> Hi Bill,
>
> This is what I use between my LINUX and Windows XP boxes in order to 
> have DIGI_NED and javAPRS which run in the LINUX box talk APRS to AGW 
> and UIview which run in the Windows XP box. These boxes are connected 
> via Ethernet.
>
> I run my APRS (UIview) locally not using TCP/IP but AX25 via the AXIP 
> port. This is because I want my UIview to have a longer PATH than the 
> javAPRS and this cannot be accomplished by using TCP/IP connection to 
> the IGATE.
>
> So here is my /etc/ax25ipd.conf that makes this configuration work.
>
> socket udp 93
> mode tnc
> device /dev/ttyqf
> speed 9600
> loglevel 2
> route sv1uy 44.154.9.11 udp 93 d
>
>
> 73 de Demetre SV1UY 

Are you sure that d works? from what I remember of that ax25ipd code is
that once it finds udp in the route command it nolonger checks for d and
b resulting in only packets adressed to that call being send, I might be
wrong but in my setup I had the callfilter code hacked so the call
comparison was always valid.

73 de Andre PE1RDW