[tacgps] Motorola oncore help needed

[Ken , VK7KRJ]

Due to a slight mishap with a power supply I have had to get myself another 
motorola oncore gps engine. (it didn't like 13.8 volts one little bit!). 
The second-hand engine I have now got does not want to talk NMEA, only 
motorola protocol. Using winoncore12, I cannot persuade it to talk MNEA no 
matter what I do. It locks and runs very nicely but as soon as I tell it to 
go to NMEA output, it falls silent and will not speak again until I switch 
back to motorola. Below is the output from the receiver in response to the 
ID command.
Any help would be appreciated, this receiver is to run with Tardis to set 
the clock on my pc (for use with WSJT) and Tardis doesn't speak 
motorola.  Looking at it another way, are there any time-setting programs 
out there that understand motorola protocol?

Cheers, Ken, vk7krj

***************************************
Motorola Receiver ID
COPYRIGHT 1991-1996 MOTOROLA INC.
SFTW P/N # 98-P36847P
SOFTWARE VER # 1
SOFTWARE REV # 6
SOFTWARE DATE FEB 22 1997
MODEL # R1221N1114
HWDR P/N # 1
SERIAL # R00VQ4
MANUFACTUR DATE 7E21

***************************************
-------------- next part --------------

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.788 / Virus Database: 533 - Release Date: 11/1/04