Order Tray | Contact Us | Home | SIG Lists

[time-freq] Screw size for TADD enclosure

J.D. Schoedel jdschoedel at verizon.net
Mon May 17 00:43:59 UTC 2010

    I had just about come to that conclusion, but just in case I might 
want to take the belt and suspenders approach.

John Ackermann N8UR wrote:
> They are 4x40, I believe 1/2 inch though a bit longer will probably 
> fit into the standoffs.
> However, I've found that the mounting hardware on the BNCs secures the 
> board very well, and using the mounting screws is probably optional.
> John
> ----
> J.D. Schoedel said the following on 05/16/2010 08:01 PM:
>> Does anyone have readily available the screw size to mount a TADD board
>> to the TADD enclosure?
>> Thanks,
>> J.D.
>> P.S. Thanks to Dino and John A. for info about connecting power into the
>> TADD enclosure.
>> _______________________________________________
>> time-freq mailing list
>> time-freq at tapr.org
>> https://www.tapr.org/cgi-bin/mailman/listinfo/time-freq

More information about the time-freq mailing list