[wxsig] 1.15.3R Time/Date Resetting?

[Clay Cottingham]

Will -

I have been playing with the TAI8540A Humidity Module and the TAI8570 1-Wire
Pressure Sensor and noticed that my system still thinks there is a
barometric pressure sensor installed even though I only had it on shortly.
Looking at the flash values for the humidity and barometric pressure IDs, I
see they are both set to "26 1B F9 55 00 00 00 CE". I will reset the
barometric back to "ff" and see what happens.

Also I noticed that the bus voltage is running 4.76 volts. This seem a
little low?

Let me play around a little more and get you some better data to work from.
I am a Software Quality Assurance manager in the semiconductor equipment
industry and I know better than to give such vague reports of issues! Sorry!
:)

Clay

-----Original Message-----
From: wxsig-bounces at lists.tapr.org
[mailto:wxsig-bounces at lists.tapr.org]On Behalf Of William Beals
Sent: Sunday, April 24, 2005 8:48 PM
To: 'TAPR Weather Station SIG Mailing List'
Subject: RE: [wxsig] 1.15.3R Time/Date Resetting?


Clay:

I've run through a few simulated "midnights" on my test unit today as well
as a few months of midnights on my "on-the-air" unit.   Can I please get a
better description of your setup as well as what you are seeing before and
after the reset so I can try to simulate your problem?

will

-----Original Message-----
From: wxsig-bounces at lists.tapr.org [mailto:wxsig-bounces at lists.tapr.org] On
Behalf Of Clay Cottingham
Sent: Saturday, April 23, 2005 11:16 PM
To: TAPR Weather Station SIG Mailing List
Subject: [wxsig] 1.15.3R Time/Date Resetting?

Has anyone had a problem with the time and date resetting with 1.15.3R? It
does it once every day.

Clay



_______________________________________________
wxsig mailing list
wxsig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/wxsig



_______________________________________________
wxsig mailing list
wxsig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/wxsig