[wxsig] 1.15.3R Time/Date Resetting?

[Clay Cottingham]

Will -

I reset my wireid's to remove the extra humidity sensor id in the baro spot.
Started running at 12:52 AM on 4/25 my time (PDT) or 8:52 AM 4/25 GMT.

First output:
_04250852c293s000t047P000r000h56e1w


Ran fine for almost 24 hours. Then this:

_04260759c000s000t050P000r000h43e1w
_04260759c000s000t050P000r000h43e1w
_04260759c338s000t050P000r000h43e1w
_04260759c315s001t050P000r000h43e1w
_04260759c023s001t050P000r000h43e1w
_01010000c338s...t050P000r000h43e1w 00010F03
_01010000c338s001t050P000r000h43e1w
_01010000c338s000t050P000r000h43e1w
_01010000c315s000t050P000r000h43e1w
_01010000c338s001t050P000r000h43e1w

I hav left it as is without resetingthe time if you want me to check
anything else.

Clay


-----Original Message-----
From: wxsig-bounces at lists.tapr.org
[mailto:wxsig-bounces at lists.tapr.org]On Behalf Of William Beals
Sent: Sunday, April 24, 2005 8:48 PM
To: 'TAPR Weather Station SIG Mailing List'
Subject: RE: [wxsig] 1.15.3R Time/Date Resetting?


Clay:

I've run through a few simulated "midnights" on my test unit today as well
as a few months of midnights on my "on-the-air" unit.   Can I please get a
better description of your setup as well as what you are seeing before and
after the reset so I can try to simulate your problem?

will

-----Original Message-----
From: wxsig-bounces at lists.tapr.org [mailto:wxsig-bounces at lists.tapr.org] On
Behalf Of Clay Cottingham
Sent: Saturday, April 23, 2005 11:16 PM
To: TAPR Weather Station SIG Mailing List
Subject: [wxsig] 1.15.3R Time/Date Resetting?

Has anyone had a problem with the time and date resetting with 1.15.3R? It
does it once every day.

Clay



_______________________________________________
wxsig mailing list
wxsig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/wxsig



_______________________________________________
wxsig mailing list
wxsig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/wxsig