[wxsig] T238+ Firmware update status

[Michael Barelli W0MAF]

Go ahead and put me on your list for wind gust.  I have seen this too. 
I thought it was related to lightning but saw it again with no
lightning.  Thanks for looking into this.
73 Mike @  w0maf-1

--- Will Beals <will at beals5.com> wrote:

> Folks:
> 
> Evidence is mounting that the occasional wind gust problem I finally
> saw
> earlier this week is a sensor issue.  I am seeing legit counter
> values that
> are irrationally high.  My two working theories are that I have a
> reed
> switch that is sending a non-logic-level value to the counter and it
> is
> counting like mad or maybe an out-of-spec voltage to the counter chip
> that
> is scrambling it's contents.
> 
> This problem has been reported by a few other folk.  If you are one
> of
> those, please let me know, I'd like to send you some test code that
> will log
> the counter values when a large gust occurs and report it to findu
> where I
> can look at it.
> 
> If I get a couple encouraging reports that it is not firmware, I'll
> go ahead
> and release the current code with the midnight lockup fix.
> 
> will
> 
> ===============================================
> This message sent using 100% recycled Electrons 
> (Minimum 30% post-consumer content)
> ===============================================
> Will Beals
> 
> 
> 
> _______________________________________________
> wxsig mailing list
> wxsig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/wxsig
> 



Michael Barelli WØMAF


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com