Order Tray | Contact Us | Home | SIG Lists

[wxsig] P&E tools.

wn0x at earthlink.net wn0x at earthlink.net
Sat Dec 16 13:31:13 UTC 2006


Rich,

Re: Noise
Have you tried removing the display and powering up the device?  This might narrow it down a bit.

Rich

-----Original Message-----
>From: Will Beals <will at beals5.com>
>Sent: Dec 15, 2006 7:16 PM
>To: 'TAPR Weather Station SIG Mailing List' <wxsig at lists.tapr.org>
>Subject: RE: [wxsig] P&E tools.
>
>Rick:
>
>First for the P&E tools, it looks like the moved their links yet again.
>Their new website structure isn't direct-linkable either so I have to give
>directions:
>
>1) Go to www.pemicro.com.
>2) Under P&E Resources, click on ICS05/08 software link.
>3) Click on the big-text ICS08/PROG08SZ text link at the botom.
>4) Click on the Fax, Manuals, and downloads tab at the top of the next page.
>5) Click on the ICS08GPGTZ v. 1.54 link about 2/3 down on the right column.
>6) You will need to log in, but the tools are still free.
>
>As to overheating:  Make REALLY sure you do not have a wall-wart generating
>something over 12-14 volts if you are still driving the LED backlight.  The
>lower the voltage on that regulator the better as long as you stay above
>7.5V.  I'm not proud of that regulator choice, but alternatives are really
>expensive, so I ended up doing it again on the T238+.
>
>As to corrupt code, you can still do downloads, code for the T238 and T238+
>is the same.
>
>Not sure on the RF unfortunately.  If you are running from the 32MHz
>crystal, that is not a nice odd harmonic of that frequency.
>
>will
>
>-----Original Message-----
>From: wxsig-bounces at lists.tapr.org [mailto:wxsig-bounces at lists.tapr.org] On
>Behalf Of Builderick at aol.com
>Sent: Friday, December 15, 2006 6:12 AM
>To: wxsig at lists.tapr.org
>Subject: [wxsig] P&E tools.
>
>Hey Will
> 
> and the group
>KB0VBZ here
>I trying to get my old t-238 working again.
>It over heats and resets all the time.
>I think I shocked it and put some static charge in it.
>Might have corrupted the code?
> 
>I cant find a good link to the programing code stuff from P & E  Tools?
>Can you point me in the right direction.
> 
>Also does anyone else see the t-238 ( old needs modem and has debug  port.
>I built it from a kit.) produce unwanted rf on 137.62mhz  Mine puts put a
>lot of (RF) on 137.62 doing in my weather satellite pictures from NOAA?
>Perhaps this is perticular to mine?
> 
>73
>Rick
> 
>_______________________________________________
>wxsig mailing list
>wxsig at lists.tapr.org
>https://lists.tapr.org/cgi-bin/mailman/listinfo/wxsig
>
>
>
>
>_______________________________________________
>wxsig mailing list
>wxsig at lists.tapr.org
>https://lists.tapr.org/cgi-bin/mailman/listinfo/wxsig





More information about the wxsig mailing list