[wxsig] Screw Sizes

[kf4ffn at bellsouth.net]

Thanks Sir Mike.
bobKF4FFN

-------------- Original message from Mike Barelli w0maf <barelmic at yahoo.com>: -------------- 


> I have the 238+ and the old prototype 238. 
> You can find data at w0maf-1 
> Good kit if you can find a good case to put it in. The Bray Baro is what I use. 
> My rain guage is not on line yet. 
> I do need to update the ram to the current ver. I have put that off for now. 
> Good luck 
> 73 
> 
> kf4ffn at bellsouth.net wrote: I'm considering a 238+ kit. Been using Peet for 
> years and looking for a more economical setup. Request list of callsigns on aprs 
> using "238+" that I might see results on findu. bobKF4FFN 
> 
> -------------- Original message from Peter Lutz : -------------- 
> 
> 
> > I believe size 2 screws often have 56 threads / inch and 
> > size 3 screws have 48 threads / inch. 
> > 
> > Kent Ochs wrote: 
> > > > The 238+ Assembly Guide lists the screws used in this project as 
> > 6-60. I'm wondering if this is a typo as I am unable to locate any 
> > suppliers of this size screw. Could someone in the group clarify the 
> > screw size used in this project and possibly point me in the direction 
> > of a supplier if the size is indeed 6.60. 
> > > > 
> > > > Many thanks and happy holidays. 
> > > > 
> > > > Kent 
> > > > W9KAO 
> > 
> > Peter 
> > -- 
> > Peter Lutz AA6AV 
> > Meaning is homemade. 
> > 
> > _______________________________________________ 
> > wxsig mailing list 
> > wxsig at lists.tapr.org 
> > https://lists.tapr.org/cgi-bin/mailman/listinfo/wxsig 
> _______________________________________________ 
> wxsig mailing list 
> wxsig at lists.tapr.org 
> https://lists.tapr.org/cgi-bin/mailman/listinfo/wxsig 
> 
> 
> 
> Mike Barelli w0maf 
> 
> --------------------------------- 
> Never miss a thing. Make Yahoo your homepage. 
> _______________________________________________ 
> wxsig mailing list 
> wxsig at lists.tapr.org 
> https://lists.tapr.org/cgi-bin/mailman/listinfo/wxsig