[wxsig] Barometer calibration
William Beals will at beals5.comSat Jan 12 21:04:49 UTC 2008
- Previous message: [wxsig] Barometer calibration
- Next message: [wxsig] data string format
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
K3YJP John: Just following up (I was on a business trip last week) to see if things are OK. will -----Original Message----- From: wxsig-bounces at lists.tapr.org [mailto:wxsig-bounces at lists.tapr.org] On Behalf Of John Bennett Sent: Thursday, January 10, 2008 8:15 PM To: TAPR Weather Station SIG Mailing List Subject: Re: [wxsig] Barometer calibration Was it working at one time? If not, then I would suspect you've fallen into the AAG 'Version 3.0' trap. It has to do with AAG swapping Vcc and ground around. When you connect the original wiring (which the T-238 and T-238+ only support) to a 'Version 3.0' everything will die. The backlight on the display is powered independently of the rest. Check Vcc on your board and see if it is in the range of 4.75 - 5.25 volts. If it is near zero, that's probably the cause. This issue has come up repeated times on this mailing list. There should be something in the archives on this. 73, John n4xi On Thu, 2008-01-10 at 18:42 -0800, John Yost wrote: > Well, the barometer calibration is not a problem at > the moment. There is still something a miss, as it > still wants to be 1040mb when it should be 1020mb. > Yes I screwed up the cal procedure more than you can > believe, but the last two times I believe I followed > it properly. > > Bigger problem now is the T238+ is dead. The last > time I connected the X1W-1 I also connected the X1W-2, > which had been previously tested and working, the T238 > lcd backlight is all I get. Voltages are ok. > > Have I fried the processor chip? > > john > K3YJP > > > ____________________________________________________________________________ ________ > Be a better friend, newshound, and > know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ > > > _______________________________________________ > wxsig mailing list > wxsig at lists.tapr.org > https://lists.tapr.org/cgi-bin/mailman/listinfo/wxsig -- John Bennett Evansville, IN Amateur Radio Web: http://n4xi.home.insightbb.com Where am I? http://www.findu.com/cgi-bin/find.cgi?N4XI Bike Racing Images: http://n4xi.smugmug.com/ Live Strong - Lance Armstrong Foundation: http://www.laf.org/ _______________________________________________ wxsig mailing list wxsig at lists.tapr.org https://lists.tapr.org/cgi-bin/mailman/listinfo/wxsig
- Previous message: [wxsig] Barometer calibration
- Next message: [wxsig] data string format
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the wxsig mailing list
