[wxsig] Crashing and random characters

[Dave Barton]

I had this issue for a while when I first built my T238+.  I don't know 
if it was a coincidence, but rather than resetting by removing power, I 
used the reset button and it has run perfectly since then. 

It's worth a shot.

Dave
AI4GF


Guy Story KC5GOI wrote:
> Hello everyone, I have been running an original t238 for the Denton 
> County ARC until recently.  I have a T238+ that I am wanting to place in 
> service at the W5NGU-3 digi site to replace the T238 we currently have.  
> I have the AAG wind instrument, baro, humidity and a Dallas 
> Semiconductor rain gauge.  I have upgraded to 1.15.8 firmware on the 
> T238+.  I did this to replace the 1.15.4 that was on it originally.  It 
> was having the same issue.  After a few hours the heartbeat indicator 
> stops and the display places question marks and left pointing arrows on 
> the bulk of the screen.  Has anyone seen this?  As of tonight I am 
> unable to search the SIG archives (I understand that TAPR had hardware 
> issues recently).
>
> Thanks and 73
>
> Guy Story KC5GOI
>
> _______________________________________________
> wxsig mailing list
> wxsig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/wxsig
>
>
>