[wxsig] Problems with a new TAPR T238+ with AAG V3

[William Beals]

Joshua:

I'm finally done with my business trip and wanted to follow up, did the
software update fix your problem?

will

-----Original Message-----
From: wxsig-bounces at lists.tapr.org [mailto:wxsig-bounces at lists.tapr.org] On
Behalf Of Mark Patton
Sent: Sunday, March 16, 2008 6:35 PM
To: TAPR Weather Station SIG Mailing List
Subject: Re: [wxsig] Problems with a new TAPR T238+ with AAG V3

Josh,

I would upgrade to the latest software.  I seem to recall having some 
problems like this with the software that was loaded with the kit.  The 
latest version is 1.15.7 so you are several revisions out of date.  The 
latest software can be found at: http://www.beals5.com/wx look for 
"latest downloads" on the menu on the left.

Good luck!  Hope this solves your problem

Mark

Joshua Hatcher wrote:
> I have recently purchased a T238+ weather station and
> I have completed its construction. I began the test
> phase, and all went well up to connecting the V3
> 1-WireR Weather Instrument for the first time. The
> startup goes well until the line "Rain Gauge missing! 
> Will ignore sensor", at this point the program
> freezes. Any suggestions where to go from here. The SW
> is version 1.15.0R (as seen on the "Display Current
> Data" menu screen. The sticker on the microcontroller
> reads 1.15.3R (or later)I am wondering if this could
> be an issue. Any help would be greatly appreciated. 
>
> Josh  
>
>
>       Ask a question on any topic and get answers from real people. Go to
Yahoo! Answers and share what you know at http://ca.answers.yahoo.com
>
> _______________________________________________
> wxsig mailing list
> wxsig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/wxsig
>
>
>
>   




_______________________________________________
wxsig mailing list
wxsig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/wxsig