Order Tray | Contact Us | Home | SIG Lists

[wxsig] T238(+) 1.16.1 Firmware release

John Yost k3yjp at yahoo.com
Thu Apr 16 22:05:33 UTC 2009


I have loaded 1.16.1 and its working well.  Using Wide121213 and the report is getting thru as well as when it was wide 2-2.

I see you updated a couple of things but have not verified them particularly the BP measurement.

Thanks again for all your help


--- On Sat, 4/11/09, William Beals <will at beals5.com> wrote:

> From: William Beals <will at beals5.com>
> Subject: [wxsig] T238(+) 1.16.1 Firmware release
> To: "'TAPR Weather Station SIG Mailing List'" <wxsig at tapr.org>
> Date: Saturday, April 11, 2009, 7:56 PM
> Folks:
> I have just posted the Rev 1.16.1 firmware release on the
> website
> (http://www.beals5.com/wx).
> This release is the first one to incorporate support for
> the new AAG TAI603
> weather head.  It also contains some other updates for
> special WIDEn-n
> features that I had never released before.
> It has been a long time since I'd done any major coding
> for the weather
> station!  I am the first to admit that I have not done a
> lot of regression
> testing on this release as my station has been down for a
> while, so unless
> you have one of the new weather sensors, I'd hold off
> on jumping on this
> release just yet.  If you do have one of the new weather
> sensors please do
> download it and provide feedback.  
> Restarting work on this code is my impetus for getting my
> weather station up
> and running again.  Hopefully I can get it up within a
> week.  After some
> more regression testing of my own, I'll let you know
> how the code is doing
> and how stable it is.
> Of course, if there are adventurous soles out there who
> just want to test
> the new code for the fun of it and report issues, I'll
> take that too!
> Known issues with this release:
> 1) If the TAI603 gets unplugged, I don't report errors,
> I report 0C.  Not
> sure how to fix this yet.
> 2) I did lock up the TAI603 once, but so far only once and
> unplugging it
> fixed it.
> 3) Other than #1, I have not seen any erroneous data
> reported, so looking
> good.
> 4) There are a significant number of communication errors
> logged (see
> earlier review)
> 4a) With some more work, I hope I can reduced the number of
> errors with
> more/smarter retries.
> will
> ==============================================
> This email sent using 100% recycled electrons.
> (Minimum 30% post-consumer content.
> ==============================================
> Will Beals
> _______________________________________________
> wxsig mailing list
> wxsig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/wxsig


More information about the wxsig mailing list