[wxsig] T238+ Sensor Setup

[Rui MR Pinto]

Thanks for the idea of getting the 1-wire to RS232 adaptor! That way I can 
test the sensors by themselves.

Rui.


----- Original Message ----- 
From: "Michael Dzado" <m.dzado at mchsi.com>
To: <wxsig at tapr.org>
Sent: Saturday, February 28, 2009 4:27 PM
Subject: Re: [wxsig] T238+ Sensor Setup


>I thought I'd chime in since I received a lot of help getting my set on the
> air.  I agree that you may have an RJ 11 cable wiring problem.  First make
> sure that you wiring is pin to pin.  Most of the preformed cables you
> purchase are twisted and will not work.
>
>
>
> I found this helpful when isolating and testing my sensors.
>
> Get a DS9097U -009 RJ 11/45 to RS 232 adapter.  This will allow you to
> connect your sensor directly to your PC.  Then download the TAI8540A/B 
> Test
> Utility from http://www.aagelectronica.com/aag/index.html.  They have
> several utilities to test various sensors.
>
>
>
> Best of luck, stick with it.
>
> Michael
>
> _______________________________________________
> wxsig mailing list
> wxsig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/wxsig
>
> __________ Information from ESET Smart Security, version of virus 
> signature database 3894 (20090227) __________
>
> The message was checked by ESET Smart Security.
>
> http://www.eset.com
>
>
>