[wxsig] questions

[Rich Beckwith]

FYI

Hello everyone!!!

We are very happy to tell you that FINALLY our New Weather Stations are
here!!!

Please visit our website at www.aagelectronica.com to place your order.

Regards

Nerea

On Sat, Feb 28, 2009 at 10:11 PM, William Beals <will at beals5.com> wrote:

> Dave:
>
> Not sure what you mean by the mother board?  Dallas only made sensors, they
> assumed that you would be running the weather station on a PC using one of
> their RS-232 to 1-wire adapters.  What we did with the T238 was to build a
> stand-alone board to get data from those sensors instead of a PC.
>
> Schematics for most boards are available, so with a bit more detail, we can
> point you in the right direction.
>
> will
>
> -----Original Message-----
> From: wxsig-bounces at tapr.org [mailto:wxsig-bounces at tapr.org] On Behalf Of
> dave
> Sent: Saturday, February 28, 2009 8:24 PM
> To: TAPR Weather Station SIG Mailing List
> Subject: Re: [wxsig] questions
>
> the mother board
>
> dave
>
>
> John Koster wrote:
> > Yes, I bought one of their WX stations before they quite selling them.
> > The whole T238 system was developed back before AAG came out with their
> > clone.
> >
> > PCB layout for which?
> >
> > On Sat, 28 Feb 2009, dave wrote:
> >
> >
> >> will the original sensors from dallas ( i think that is where they are
> >> from)  work with the t238+
> >>
> >> and are there pcb layout ( traces) available?
> >> or am i stuck with the tapr stuff?  money is an problem.
> >>
> >> dave k7da
> >>
> >>
> >>
> >
> >
>
> _______________________________________________
> wxsig mailing list
> wxsig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/wxsig
>
>
> _______________________________________________
> wxsig mailing list
> wxsig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/wxsig
>