Order Tray | Contact Us | Home | SIG Lists

[wxsig] questions

Rich Beckwith rjbeckwith at gmail.com
Tue Mar 3 18:02:42 UTC 2009


http://www.aag.com.mx/aagusa/index1.html

Try this.

LED illumination? Why?

Rich
On Mon, Mar 2, 2009 at 6:36 PM, John Koster <w9ddd at tapr.org> wrote:

> So how does anyone get past the flash content if that's also the menu
> system?  Yes, I do not have a flash plug-in installed.
>
> On Mon, 2 Mar 2009, Rich Beckwith wrote:
>
> > FYI
> >
> > Hello everyone!!!
> >
> > We are very happy to tell you that FINALLY our New Weather Stations are
> > here!!!
> >
> > Please visit our website at www.aagelectronica.com to place your order.
> >
> > Regards
> >
> > Nerea
> >
> > On Sat, Feb 28, 2009 at 10:11 PM, William Beals <will at beals5.com> wrote:
> >
> > > Dave:
> > >
> > > Not sure what you mean by the mother board?  Dallas only made sensors,
> they
> > > assumed that you would be running the weather station on a PC using one
> of
> > > their RS-232 to 1-wire adapters.  What we did with the T238 was to
> build a
> > > stand-alone board to get data from those sensors instead of a PC.
> > >
> > > Schematics for most boards are available, so with a bit more detail, we
> can
> > > point you in the right direction.
> > >
> > > will
> > >
> > > -----Original Message-----
> > > From: wxsig-bounces at tapr.org [mailto:wxsig-bounces at tapr.org] On Behalf
> Of
> > > dave
> > > Sent: Saturday, February 28, 2009 8:24 PM
> > > To: TAPR Weather Station SIG Mailing List
> > > Subject: Re: [wxsig] questions
> > >
> > > the mother board
> > >
> > > dave
> > >
> > >
> > > John Koster wrote:
> > > > Yes, I bought one of their WX stations before they quite selling
> them.
> > > > The whole T238 system was developed back before AAG came out with
> their
> > > > clone.
> > > >
> > > > PCB layout for which?
> > > >
> > > > On Sat, 28 Feb 2009, dave wrote:
> > > >
> > > >
> > > >> will the original sensors from dallas ( i think that is where they
> are
> > > >> from)  work with the t238+
> > > >>
> > > >> and are there pcb layout ( traces) available?
> > > >> or am i stuck with the tapr stuff?  money is an problem.
> > > >>
> > > >> dave k7da
> > > >>
> > > >>
> > > >>
> > > >
> > > >
> > >
> > > _______________________________________________
> > > wxsig mailing list
> > > wxsig at tapr.org
> > > https://www.tapr.org/cgi-bin/mailman/listinfo/wxsig
> > >
> > >
> > > _______________________________________________
> > > wxsig mailing list
> > > wxsig at tapr.org
> > > https://www.tapr.org/cgi-bin/mailman/listinfo/wxsig
> > >
> > _______________________________________________
> > wxsig mailing list
> > wxsig at tapr.org
> > https://www.tapr.org/cgi-bin/mailman/listinfo/wxsig
> >
>
> --
> 73,
> John, W9DDD
>
>
> _______________________________________________
> wxsig mailing list
> wxsig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/wxsig
>


More information about the wxsig mailing list