[wxsig] questions

[Rich Beckwith]

Will,

Do you know if the unit from Texas Weather Instruments is compatible?
http://www.txwx.com/1wire_bro1.htm

At $250 it is over twice the cost of the original Dallas or AAG unit but
looks exactly like the Dallas  unit to me.

Rich

On Tue, Mar 3, 2009 at 9:03 PM, William Beals <will at beals5.com> wrote:

> Wow, that is a big change from the original sensors--and unfortunately
> clearly not T238(+) compatible.
>
> will
>
> -----Original Message-----
> From: wxsig-bounces at tapr.org [mailto:wxsig-bounces at tapr.org] On Behalf Of
>  Rich Beckwith
> Sent: Tuesday, March 03, 2009 11:03 AM
> To: TAPR Weather Station SIG Mailing List
> Subject: Re: [wxsig] questions
>
> http://www.aag.com.mx/aagusa/index1.html
>
> Try this.
>
> LED illumination? Why?
>
> Rich
> On Mon, Mar 2, 2009 at 6:36 PM, John Koster <w9ddd at tapr.org> wrote:
>
> > So how does anyone get past the flash content if that's also the menu
> > system?  Yes, I do not have a flash plug-in installed.
> >
> > On Mon, 2 Mar 2009, Rich Beckwith wrote:
> >
> > > FYI
> > >
> > > Hello everyone!!!
> > >
> > > We are very happy to tell you that FINALLY our New Weather Stations are
> > > here!!!
> > >
> > > Please visit our website at www.aagelectronica.com to place your
> order.
> > >
> > > Regards
> > >
> > > Nerea
> > >
> > > On Sat, Feb 28, 2009 at 10:11 PM, William Beals <will at beals5.com>
> wrote:
> > >
> > > > Dave:
> > > >
> > > > Not sure what you mean by the mother board?  Dallas only made
> sensors,
> > they
> > > > assumed that you would be running the weather station on a PC using
> one
> > of
> > > > their RS-232 to 1-wire adapters.  What we did with the T238 was to
> > build a
> > > > stand-alone board to get data from those sensors instead of a PC.
> > > >
> > > > Schematics for most boards are available, so with a bit more detail,
> we
> > can
> > > > point you in the right direction.
> > > >
> > > > will
> > > >
> > > > -----Original Message-----
> > > > From: wxsig-bounces at tapr.org [mailto:wxsig-bounces at tapr.org] On
> Behalf
> > Of
> > > > dave
> > > > Sent: Saturday, February 28, 2009 8:24 PM
> > > > To: TAPR Weather Station SIG Mailing List
> > > > Subject: Re: [wxsig] questions
> > > >
> > > > the mother board
> > > >
> > > > dave
> > > >
> > > >
> > > > John Koster wrote:
> > > > > Yes, I bought one of their WX stations before they quite selling
> > them.
> > > > > The whole T238 system was developed back before AAG came out with
> > their
> > > > > clone.
> > > > >
> > > > > PCB layout for which?
> > > > >
> > > > > On Sat, 28 Feb 2009, dave wrote:
> > > > >
> > > > >
> > > > >> will the original sensors from dallas ( i think that is where they
> > are
> > > > >> from)  work with the t238+
> > > > >>
> > > > >> and are there pcb layout ( traces) available?
> > > > >> or am i stuck with the tapr stuff?  money is an problem.
> > > > >>
> > > > >> dave k7da
> > > > >>
> > > > >>
> > > > >>
> > > > >
> > > > >
> > > >
> > > > _______________________________________________
> > > > wxsig mailing list
> > > > wxsig at tapr.org
> > > > https://www.tapr.org/cgi-bin/mailman/listinfo/wxsig
> > > >
> > > >
> > > > _______________________________________________
> > > > wxsig mailing list
> > > > wxsig at tapr.org
> > > > https://www.tapr.org/cgi-bin/mailman/listinfo/wxsig
> > > >
> > > _______________________________________________
> > > wxsig mailing list
> > > wxsig at tapr.org
> > > https://www.tapr.org/cgi-bin/mailman/listinfo/wxsig
> > >
> >
> > --
> > 73,
> > John, W9DDD
> >
> >
> > _______________________________________________
> > wxsig mailing list
> > wxsig at tapr.org
> > https://www.tapr.org/cgi-bin/mailman/listinfo/wxsig
> >
> _______________________________________________
> wxsig mailing list
> wxsig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/wxsig
>
>
> _______________________________________________
> wxsig mailing list
> wxsig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/wxsig
>