Order Tray | Contact Us | Home | SIG Lists

[wxsig] Several T238+ questions from a newbie

will at beals5.com will at beals5.com
Wed May 12 04:07:23 UTC 2010


You caught me at a temporary disadvantage, I am on a business trip without my documentation. I will need until Saturday to respond.

Sent with thumbs from a PDA

-----Original Message-----
From: "Ted11" <tedlists at hullar.com>
Date: Mon, 10 May 2010 20:49:36 
To: <wxsig at tapr.org>
Subject: [wxsig] Several T238+ questions from a newbie



Finally finding the time to put together my radio and weather interests.
After getting my technician license a while ago (yeah, once they dropped the
code requirement), I decided a few years ago to do a career change and am
currently studying atmospheric science.   I've been asked to do some weather
monitoring and analysis for a local event, and it looks like the T238+ is
the best way to accomplish everything I want to do.  


Had a few questions as I start to dig into the project.  


1.  On page 2 of the operations manual (Rev 2, April 2005) the description
of J4 says, "Use either this header or J5, do not use both at the same
time."  I think this might be a typo, J5 is the 1-Wire interface and I would
think it should always be used.  If the manual is incorrect, which header
shouldn't be used with J4?


2.  Do you have a recommendation how far I can run the 1-Wire cable (between
the T238+ and the AAG instruments)?  


3.  Is it possible to have the unit do computer output (5 sec intervals) to
the Computer Data Connector (J4) while at the same time sending packet data
to the modem at 5 minute intervals?  The UART settings seem to suggest the
choice is either one or the other.  Is this a hardware or software
limitation?  Ideally, I would like to log the data locally, as well as send
it out via APRS, even if the local logging only happens at 5-minute


4.  As far as equipment necessary to log data from the serial port, the
obvious choice is a computer.  Down the road, I would like to set up the
weather instruments as a solar-powered stand-alone weather station for some
research work.  I won't have enough juice to run a computer, and there is no
nearby digipeater.  Seems to me a Palm device or PocketPC might be able to
log the data, but I'm not sure how to use any of those devices to log data.
Anyone have a suggestion for how to do this?  


Thanks for the help.  






wxsig mailing list
wxsig at tapr.org

More information about the wxsig mailing list