"Part,Value,Device,Package,Description,Pin Spacing,"
"C1,100n,C-US025-030X050,C025-030X050,""CAPACITOR, American symbol"",""0.1"""""","
"C2,100n,C-US025-030X050,C025-030X050,""CAPACITOR, American symbol"",""0.1"""""","
"C3,100nF,C-US025-030X050,C025-030X050,""CAPACITOR, American symbol"",""0.1"""""","
"C4,270pF,C-US025-030X050,C025-030X050,""CAPACITOR, American symbol"",""0.1"""""","
"C5,680pF,C-US025-030X050,C025-030X050,""CAPACITOR, American symbol"",""0.1"""""","
"C6,680pF,C-US025-030X050,C025-030X050,""CAPACITOR, American symbol"",""0.1"""""","
"C7, 270pF,C-US025-030X050,C025-030X050,""CAPACITOR, American symbol"",""0.1"""""","
"C8,100n,C-US025-030X050,C025-030X050,""CAPACITOR, American symbol"",""0.1"""""","
"D1,1N4148,1N4148,DO35-10,DIODE,""0.4"""""","
"J1,40 pin,PINHD-2X20,2X20,PIN HEADER,""2x20 on 0.1"""" centers"","
"J2,BNC,BN35N61,B35N61,BNC CONNECTOR,see below,"
"L1,FT37-43  3.15uH,T37_INDUCTOR,T37_INDUCTOR,Inductor wound on a T37 Toroid,,<=== This is 5 turns around an FT-37-43 toroid core"
"L2,1uH,L-USIRF-1,IRF-1,""INDUCTOR, American symbol"",""0.45"""""",           (I've gotten the cores from kitsandparts.com)"
"L3,1.2uH,L-USIRF-1,IRF-1,""INDUCTOR, American symbol"",""0.45"""""","
"L4,1uH,L-USIRF-1,IRF-1,""INDUCTOR, American symbol"",""0.45"""""","
"LED1,LED,LED5MM,LED5MM,LED,""0.1"""""","
"Q2,BS170,BS170,SOT54E,N-CHANNEL MOS FET,,""<== I thought this was a TO-92, but I guess I'm wrong. Doesn't matter - can bend the leads to fit."""
"R1,10K,TRIM_US-CA6V,CA6V,POTENTIOMETER,""0.2""""x0.2"""""",""<=== The pins are in a triangular pattern with the top two pins 0.2"""" apart."""
"R2,47,R-US_0207/10,0207/10,""RESISTOR, American symbol"",""0.4"""""",""            The third pin is 0.2"""" below the top pins and 0.1"""" (middle) horizontally."""
"R3,20K,R-US_0207/10,0207/10,""RESISTOR, American symbol"",""0.4"""""","
"R4,1,R-US_0207/10,0207/10,""RESISTOR, American symbol"",""0.4"""""",<=== Any physical sized resistor will work for any of the resistors."
"R5,9.1K,R-US_0207/10,0207/10,""RESISTOR, American symbol"",""0.4"""""",""          The holes are 0.4"""" apart."""
"R6,270,R-US_0207/10,0207/10,""RESISTOR, American symbol"",""0.4"""""","
"R7,2K,R-US_0207/10,0207/10,""RESISTOR, American symbol"",""0.4"""""","
"S1,DTS-6,DTS-6,DTS-6,,""0.2""""x0.25"""""",""<=== This is a DPST pushbutton switch, although I'm only using 1 pole."""
",,,,,,""         The switch connections are across the 0.2"""" dimension side."""
",,,,,,"
",,,,,,"
",* The BNC connector is a weird one. The link and measurements I made are below. I've got enough stock to cover 30-40 kits in addition to the kits I've already put together.,,,,,"
",,,,,,"
",center pin dia,""0.038"""""",,,,"
",ground pin dia,""0.047"""""",,,,"
",ground pins,""0.262""""x0.262"""""",Center-to-center,,,"
",https://www.aliexpress.com/item/BNC-female-jack-center-PCB-mount-Soldering-Straight-RF-Coxial-Connector-Adapter-for-Mobile-signal-booster/32409395009.html?spm=a2g0s.9042311.0.0.N2m6ov,,,,,"